Viewing all customer Discussions for:

39-107 Truth Hardware Operator Cover

As you can tell from the photos the end of the auger part of the window has broken. I don't have the part numbers but they are Truth hardware pieces. Do you have the piece that i can screw into the handles? Or if they are part of the handles that would work as well. Please let me know if you need ot ... (cont.)

Hi I believe the entire operator needs replacing but wanted to get an expert's opinion. The crank has 45012 printed on it. Please help identify the parts that need replacing. Thank you.

We need the window operating mechanism and handles for Crestline windows installed in approx 1990. Please indicate if you need further information to identify the parts. Thank you. Roxie Hansen

Hello - could you please help me identify which opener I need order on your site.

not sure what brand or model

Hello, Looking to replace some cranks and I need a little guidance. They are Truth cranks. I measured 8-3/4 for the arm, but I probably didn't measure correctly. I will have to go back and do it again. I did take some pictures of the model numbers, but not sure how much they will help. Any guidanc ... (cont.)

I'm looking to replace 2 broken window cranks. The label on them says Truth 30743L and Truth 30844R.

I have Vetter casement windows from 1998. The corner on 2 of the windows doesn't pull in and close properly. Is that a hardware problem? Are the parts available. Several numbers on the hardware: 20810, 515381A. Thanks

I am looking like this: i will need right and left. I hope you can help identify my request.Also i will need cover and handle to this mechanism brown colour, thanks

30710 40245

Bottom sill appears to be one solid strip not, sure how to remove. Could someone assist me? Any help is greatly appreciated.

Need replacement parts cover and handles to open the windows. Also are there full replacement windows? 14x 34 roughly. They are older the one pops out at the bottom. I can't open to see the model number.

Hello, Seeking a replacement crank (Truth brand) for a Pozzi window. Please see attached photos. Happy to answer any questions or provide info. Looking forward to your reply, Karen

I am getting ready to sell my home and I have several window cranks that need replaced. Both left and right. They are around 31 years old. They have "K/K" on them. See picture. Can you help? Thanks Ed

Looking for a replacement operator for my casement window

Please help

I am in need of top brace part number #6690 and part #A6L bottom brace.

My window crank is no longer working and I think I need to replace it. The cut out for the crank is 5in. The long arm that says entry gard truth is about 9in. The part that says 20810 is about 4.5in. The part attached to that says L30841.The part attached to the bottom of the window that swings ... (cont.)

I need covers for wind out casement windows I do not know mfg.i will include photos hope to find 2left and 2right

Need these parts