Viewing all customer Discussions for:

39-107 Truth Hardware Operator Cover

Hi. Have an 80 year old garage with a 2nd floor. I have two awning type windows (they hinge at the top) but do not have the hardware to open and close. I usually prop them open with a block of wood. Can I add this hardware to these windows to make them open?

Here are the two pics of the window operators. Please let me know if you can find a replacement. Thank you.

Need (4) replacement window cranks and covers for this window?

Would like to order (2) of each: operator Truth EntryGard (photo #4) for casement with hinge on right edge as from inside; on back of long arm 30470LH cover no part number, white (photo #2) crank 45054, white (stripped (photo #1) bracket #20545 (photo #3)

The operator arm is about 9 inches, and the only visible number in the operator is 31538. The original supplier is Truth Entrygard.

thanks! Denise

I was hoping you could help me figure out the manufacturer of this window. We need 2 sashes replaced and hardware.

To whom it may concern, I am currently working on a country club in New York and I'm fixing/replacing some hardware on a bunch of windows. I would like to know pricing/availability/lead time on the following pieces I'm looking for stud brackets, keepers, flange keepers, escutcheon and handle ... (cont.)

I don't see any labels on the window as to brand name or any other sticker. I'm looking for a replacement window crank cover- I took a picture of the opposite window so you can see what it looks like. The dimensions are- 5 inches long. 1 inch tall and 1.25 inches deep at the widest point. ... (cont.)

I have viewed how to videos on Utube and am confident I can replace and or repair these two cranks that are not working properly. The weather has not been in my favor to remove the part so I am hoping with numbers shown on the part that perhaps you can lead me accordingly. Also, thinking about repla ... (cont.)

Does 39-107 replace 39-323 Operator covers?

I need to replace several crank covers for our casement windows. The brand of window is Willmar, - no longer made. The covers in your inventory look like they will work #39-107 Truth Hardware Operator Cover. I am enclosing photos of my cover. Do the dimensions of my cover match the dimensions of you ... (cont.)

Hello, I have a Pozzi window circa 1998. The crank needs to be replaced. Attached is an image. The arm is about 9.5" long. Can you help me? Hope so! Thanks, Joe

I have windows manufactured by a Canadian company, KML which was sold off to Anderson Windows about 10 years ago. Anderson no longer carries parts for these casement windows. I have several crank handle operators and locking mechanisms that have failed and I am looking for replacements. Can you o ... (cont.)

Not sure the part number for it. It's for bay window. I do have a window locking mechanism that was part number 38-013 if that helps. Thanks.

the screw-type piece that the handle attaches to does not open or close this window. I believe the metal on the end of the screw piece has partially broken off, thus the problem. The white handle attaches to this part. See 4 pics attached.

Hello. Attached is a right hand operator with dimensions. I'm looking for the left hand operator with the same dimensions. Will also need your window crank part number for the operator that you direct me to. The operator has the following part #'s on it: Name stamped on operator long arm: Entry ... (cont.)

We are replacing the handle on some windows. I just ordered this from you: Truth Hardware Operator Cover 39-107 option: white Crank Handle, 11/32" 39-114L option: white But I am not sure which locking handle (see photo) to order. Thank you!

casement crank mechanism

The only markings were on the window slide mechanism Truth Entry Gard 4038. I need the clips that hold the window crank worm gear mechanism in their receptacle. The two half moon pieces