Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Aloha! My windows are only about 10 years old but the humidity has missed the mechanisms. The crank is ok, the hinge is ok but what appears to be rusting out is the mechanism that connects the crank to the hinge. I watched your video on how to take it apart, but there doesn't seem to be an obvious ... (cont.)

More information on the hardware

I am looking for 5 hables Truth 25240 19. Or a substitute. Thanks

I need 2 right operators and 2 left operators along with 4 cranks and 4 latches operator part no 31850, latch part no 45428

Can I replace the bearing wheel instead of the entire single arm operator assembly? If so, questions: Is the pin threaded? What exactly would the replacement part be called? Do you stock these parts?

I need to replace the crank/operator. Can you help me figure out the parts I need? The window crank unscrews and can open but not shut the window anymore.

Looking for this part. There are no other markings on it. The handle says Row

I need the new handle crank for Alside window about 12 years old and white.

I need to replace an awning window operator that has stripped threads on the insert that holds the handle to the base. The operator is marked "Truth" and I believe the model is 11-14. The operator arms measure approximately 25". Thanks

The end of the handle actually goes into the hole, it does not wrap around a knob. The tip that inserts might be about one half inch in length or less.

Crank just turns and nothing happens? Help!

I'm sending pictures per your request to see if you can match a crank up for our windows. Need a left and right hand if available that will match up. All measurements and part numbers are listed for the windows in attached ipicture.. Let me know if you can match the crack and covers for both sides. ... (cont.)

Its a Milgard casement operator. Do you stock this. Getting parts from Milgard is like pulling teeth.

Trying to repair broken crank mechanism. Handle turns, but brass bushing appears to be stripped and does not provide resistance to open/close window. I don't see an allen nut socket which might secure this type of bushing). "Truth" stamped on one of the lever arms, "Window Shield" on the handle (wi ... (cont.)

Good morning, I'm wondering if you have this window crank? I believe it's from an earlier model Jeld-Wen casement window. It is is a folding handle. thank you for your time and be well....Dave

I have both left and right side cranks that need replaced on my bay window. The brass arm connected to the gear says TRUTH and the inside of the white housing is marked with MADE IN USA and U.S. PAT.4505601, PAT.CANADA I986, U.K. PAT.2I35397

Hello, I have the "Truth" crank operators that will not open and I am not sure what to order. Please see the attached pics. Thank you, Darrell

I'm looking to replace the operator mechanism and the clip attached to the window. Prefer a white, fold away crank. It would be ok if the window had to open a few more inches. Can you suggest the parts? Thank youTom

I am looking for a crank operator for a Crestline casement window.

Hi, I need 4 crank covers (see picture one). 1 in the bronze color and 3 in white. These seem to be Pozzi/Jeld Wen casement windows (see picture 3. I also need 1 new locking hardware (see pictures four and five for a complete one). Picture 2 shows the window lock that is missing the lever. So, ... (cont.)