Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Hello. Could you help me locate what I need. Three of our 1980s windows have trouble with the operators. The right window totally rusted out the bottom link which I cannot see in your models. It seems to be for support. You can see it in this picture. This is the best one. They all should be replace ... (cont.)

Hello, The crank on our window is broken. I have included pictures. There is no brand name mentioned, just the number 45054 on the inside of the crank. What part(s) do I need? Can I just replace the crank or will I need to replace the entire thing? Thanks very much for your help. Matthew ... (cont.)

I have a Crestline window that needs an operator. Is this something you could help me find? Thanks. Bryan

Hi, I have a number of Caradco casement windows in my home that were installed in 1986. A couple of them have experienced mechanical/operator/crank failures while still maintaining a good weather seal, no warping or rotting and sealed double glass. I would like to fix the mechanical problems if poss ... (cont.)

First picture is operating window that is same size. Second is window missing part. Operating arm is 12". Crank part number is 40055. Thank you

Please find the attached pictures of existing window insulation. We need both Left and right Operators and Hinge replacements. Are these "ENTRYGARD

Sash Controls, Inc., Det. 14 Mich., Pat. No. 3.085.299

Hello, I am searching for replacement. This weatherstrip came out of a Norco casement window. Thanks for any help, Ed

What is the difference between 39-107k and 39-375? Thank you.

We are doing a large restoration job in VA and will need to replace several, several awning cranks. The attached pics are an example of a typical crank that will be replaced. Please contact me with any questions or if you need more info.

Folks, I ordered your part # 39-326 and as you can see from the attached photo, it is not quite the same as the one that came of the window that I

I'm noticing several threads on this. Ours also broke this year (the left window) when you are looking outwards. Please verify if the LH 39-329 is the correct one for the left window and which handle is the correct replacement. I verified the sizing on these is the same as ours.

Looking for a crank for vent vue window. Putty in color ( stone?) Can I use the Anderson part? Will colors match? Thank you, Sheila

We moved into this house (built in '78 +-) and 12 casement windows all do not operate. Seems the controllers are broken. Attached are three photos - 2 of the controller, and 1 of the window. Any help is appreciated! Dave

I have Anderson casement windows, will yours work?

Hey, I'm looking for a full crank assembly for this window. If you look at the crank itself the metal part that the handle attaches to to open the window, it doesn't open or close past a certain point, and you have to either pull on the knob and unscrew it or push on the knob and screw it in order t ... (cont.)

Are you able to assist me with this hardware? Your help is much appreciated Thank you Victor

It seems the gear is stripped and will not open or close correctly. The part number looks like 45136 with a pat # 4505601

Part is stamped RH. 9.5" arm. Down offset. 3.0" x 1.5" (center) holes

Think I need part numbers 39-413 and 39-348? If so do the clips come on the sill mounted operator? Should I replace the shoe studs? What are the dimensions of the crank body as I measured in my pictures? Are they the same?