Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Here is a pic of my window crank. How do I determine make and model?

Windows won't open or close Do you have any idea what replacement parts I would need. I can't find any locally

I need a few covers for Norco's Teton Primed Casement, JEL-N-303, in white. Would this be available?

I need to replace the left side operator. Attached are photos of the right, which I'm able open, but the left side needs the replacement part. Can you tell which part I need? The operator arm is about 8 1/4 inches to the elbow / bend, then another two inches (approximately)

Need help identifying this crank operator. Thank you.Donald

Do you have a Swisco controller that will substitute for a Entry Gard Truth 20755

On the bottom of the handles is the number 45240 16. I have three awning casement windows. One is good. The others two need replacement handles and gears. One of the gears came out with the handle. The last window the handle rotated off. The initial problem is two of the windows would not crank ... (cont.)

Says detroit on the metal.need about 6.

Hello, Looking for a part recommendation to replace a component labeled as Entry-Gard with 20812 and L on one crank arm and 45179 on the mounting plate. Cheers! Thanks, Graham

hardware is truth entry gard. these windows are 1994 vintage and i am told they are posey brand windows. the window has been used hard, blown open in past wind storms and do not operate well. hinge plates and arms have been bent. i dont know if operator requires replacement but feel like i shoul ... (cont.)

I have older Truth Series 11 operators (close to your 39.348 item) and would like to update them. It looks like the Encore operator will fit with new mounting holes and a new track. Parts required per window are(?): 1 - 39-239B operator 1 - 39-375 handle/cover 1 - 39-556 16" track 2 - 39-536 pivot s ... (cont.)

Semco Window was installed in 2002. Crank is on the right side when looking out. Appears to have a single straight arm about 9 inches long. Actual part has "Truth" name on the arm. Also need a white or beige crank handle.

I want to replace the crank and cover on my Amerimax Casement windows with folding handles and covers. The item I think would work is the Encore Truth Folding Handle with Cover, part #39-375 (right crank) and #39-376 (left crank) but I would like your advice. Attached are pictured of the Amerimax ... (cont.)

I need two left and two right. Please advise. Thanks, Dan

The arm measures about 9 inches. The house was built in 1960 and I assuming they are original windows. I am not sure of the brand of window as I didn't see any identifiers on it.

Need a replacement for the picture shown

What do I need to fix this

Need help identifying the assembly pictured. Numbers are in photos. I appreciate any help you can provide with finding the correct assembly.

I am looking for a T-handle for my Crestline awning window. It is from the 80's. Which do you recommend?

I need to purchase a replacement part