Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Anderson 2420 RH can't find one

What model is this window hand cranker and do you have it in stock? I need both left and right. Thank you

The window opens without a problem by pushing the glass, but the crank is no longer attached. See the photos; the photo with the metal cover over the mechanism is from another window by the same manufacturer. I believe the manufacturer was Weather Shield. What part do we need? Thank you,Nancy ... (cont.)

operating hardware # stamp is 20755. are you able to assist identifying replacement operators? Thank you, Dave Gaal

The window is Milguard from about 1995. The top of the long arm is stamped with "Entry Gard TRUTH" The bottom of the long arm is stamped "30757LH" The shorter angled arm is stamped "30851" The shorter straight arm (attached to the angled arm) is stamped "20312" It looks like the spiral gear on the ... (cont.)

I think it is a Milgard product, the gear teeth cannot engage, it may be worn out.

Request assistance with identifying the correct casement window closure hardware in the photos.

I need replace for above referenced crank. Do you have the correct part? Thanks for your help. C.Akkad

Casement window operator and crank

20545,20310, manufacturers Truth 30842R,40471

Hi, I am looking for the same type mechanism that is shown in this thread. Please see attached pictures and let me know via email, how I might purchase these.Thank you,

This is an operator for a right-hand window, I need the same type for the left-hand. The only writing I can see on it is "Truth Entry Gaurd". Is this enough information with pics or do I need to completely remove it?

I believe the brand of widow is Crestline. Number on the arm is 31850 number on bottom of operator is 07282003 0330. Looking to replace everything. Thanks for your help

All It has marked on it is Anderson. I just need something to replace this not sure it matters the brand.

Where can I purchase?

The window crank spins and will not open the window. This is the visible part to the operator showing it as Truth 30905. What needs to be replaced to get the crank functioning properly? Is it just this part that needs to be replaced or are there other connected parts to it that need to be changed ou ... (cont.)

Hi, are these your products. If so, please provide the replacements I need to order. I have two identical window that need repair. Thanks, Daniel

Hi, I believe this is a K&K assembly that has broken.

In replacing the operator I found two of the screw holes don't line exactly (previous operator was a double arm), and for some reason there is a gap in the sill too close to two of the attachment screw holes (see attached pic). The new operator is installed and works but is attached by only 3 of th ... (cont.)

This is a sill mount casement crank with are length approx 10.375 center to center and 7/8 diameter roller The crank housing measures 4-1/16 long x 1-1/2" total width of housing is 2-3/4