Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Crank don't work window don't pull shut

Greeting from Hawaii, I've attached pictures of the window actuator that needs replacing. We have figured out the hinges, part number is 36-004-10.

Please help me determine what replacement part to get. Do you need a picture with the window open?Thank you.Cindy

Window mechanism on the bottom of the window

Hi, I'm hoping you can help me source a replacement for a window crank and guide setup. The aluminum guide measures 13 7/8" long and 11/16" wide at the outside edges with a slot between the roller guides that measures 7/16" wide. The guide roller piece is secured to the of the mechanism arm and ... (cont.)

The 21'' matches, BUT the 7'' does not...mine is 5''. Will this work anyway? Can i have any help to replace this?

Not sure but seems a truth window operator. However, the dimension do not match. My operator is 21'' (picture 1052) and the front part where the handle goes (see picture 1051) is around 5''. The hook (see picture 1056) is a bit less than 4''. Any idea what could be the model? I also need some help ... (cont.)

I have casement windows, circa 1982-84, that have cranks that have failed. I need both left and rights. From what I have found, US patent number 4.241.541 1982 and on the short arm is etched number 31538. Long arm is approx 9 1/2" and short arm approx 3 1/2" to swivel then 4"

No identification names or numbers . Larger pic is window crank part and smaller pic is window lock

I have Semco windows and the crank operator appears to be the same brand. I am not sure of the gold gear mechanism. The window crank that you spin to open/close the window seems to have unscrewed itself from the unit, which now redners it uselss. Do i need to replace the entire piece, meaning, the o ... (cont.)

Need approx 20 replacement hardware and handles for commercial aluminum windows. Truth hardware US Pat 2135397

Single crank turns 2 arms to open Window can crank out but assembly just unscrews and falls apart when you try to crank it in. Is there a replacement assembly?

Attached are the requested photos

Only marking made in USA. I beleive the manumanufacturer is Truth. Screws hole are 4 3/4 and 3 7/8.

Truth bracket replacement, please advise

I have 2 windows that won't crank open. The window dimension is 32 x 44. One crank part has a number 30744D. One of the rails has number 40942. I've attached some pics.

looking for these replacement parts. all seen in picture left and right in white please.

This is the hand crank to open side windows on a living room exterior window. One crank is broken. Base Dimension: 5 7/8 long by 1 3/8

I recently had some second hand Jeld Wen windows installed in a remodel. The casement window lost the handle in the transition. I need to get some replacement but there's no recommendations to which handles go with which crank. Just trying to find images of the hardware in tact has proven difficult. ... (cont.)

Sending my pictures for casement window parts. The old parts of window is name Wright looking for operator with split arm,left as shown in picture and also sash lock for it