Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Greetings! I'm trying to repair a Crestline Casement Window that was probably installed in the mid-late 1980s. The glass dimensions are 24" wide by 42" tall. One arm is labelled "Entry Gard Truth". One crank arm has the number "20810" stamped on it. One crank arm has the number "31538" stamped on ... (cont.)

Hope the photos are big enough for you to get the numbers. Any help is much appreciated.

I have four identical casement windows I need new window cranks for. The current cranks are double-hinge Truth cranks, and the arms are roughly 8'' long. Also, please explain how to measure the crank length so I can order the correct one.

Looking for this window mechanism. The window is a Marvin awning about 44" X 16", with a glass date of 2001. Stamped on the bottem is "Truth #45002". I would prefer a white operator cover and also would need a white crank. Will take what color is available. Thanks for your help.

Have multiple casement windows with stripped operator / handle. The stamp inside the window panes is 'Security Window Co.' from 1976. On the upper operating arm the number 30146

Hi, Hope you can assist me. Im looking to find the model / spec for encasement window operator. The brand written on it is 'Truth'. It appears to be 'in' the sill, I think it is dual arm (has 2 arms), and I believe it is left open. Any assistance would be appreciated!! Thanks, Julian ... (cont.)

Please help me with product identification. The unit is good, just my crank seems to be the problem. Should I replace the entire unit or can I just replace the crank.

46251 on base 31850 on arm Need a right and left End mount bracket seems to have a spring tension ring not sier if removable

My windows are made by Windsor. The inside of the casement contour cover has Truth Hardware written in it. Do you carry these? Can you please identify the color as well? I am guessing that it is bronze. Thank you in advance.

As near as I can tell this is what I Have Truth 40068 11 inch Single Arm Casement Operator, Right Hand, Rear Mount Dark Bronze Screw holes are 3-7/8" and 4-1/2" on center, 5-1/2" overall cast body I can not find a rear mount with 11" arm

?Do you have a replacement for a Marvin 3248 casement window operator crank assembly? I purchased the window in July 1989 and the gears are now stripped. It opens but doesn't close. The assembly arms are stamped "Truth."

The stamped numbers are close to a few that I looked through L30841 LH30470 But measurements don't match

Hi. I need to replace the entire arm. Can you help tell me what part I need? Silverline Window. Thanks

About 25 years old. Says Caradco on cover and Truth on inside of cover. Widest point of cover is 5" long. The stem (or whatever it is called) that turns the sprocket wheel just sort of corroded and crumbled.

Hello I am looking for a part number for crank handle and the actual operating arm per the attached pictures below. This is what it looks like without the cover.

I have two windows needing replacement parts for R split arm crank mechanism probably installed in 1988 when the house was built. The only id seen is the logo Truth and a number 20810. Can you please help me find two of these parts?

We are working on a remodeling project and the home is missing 4 cranks . Number on other cranks is 45001. Do you have anything that matches that.

Need the crank mechanisms

Need to know if you have windows handle

It is stamped as Truth 45275. The arm is stamped with 40267. Total arm length about 9.5" 4.5" from the end to the bend in the arm. Thank you!