Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Need to find out what crank matches this and fits. Please let me know. Thanks.

One of the windows is missing the crank cover. The contractor suggested the following replacement but it is out of stock. Crank cover: https://www.amazon.com/gp/product/B01NA08Y3W/ref=ox_sc_act_title_1?smid=ATVPDKIKX0DER&psc=1 Do you have a suitable replacement to offer? Thanks!

Truth model 40068 Single casement, 1996 install 11.5 arm. 5.5 crank front

Do you have a replacement operator for this window? The tag says C.C.M.C.12286-L Casement. Thanks Mark

What do I need to replace to fix and what parts?

Arm and crank of the window is broken and I need a replacement part that suits this window.

Hello, I think I made a mistake in ordering a replacement part. The one I received is not the same as the one in the picture above. Can someone please help me order the correct replacement assembly>

I was trying to find the exact piece I'd need to purchase to have this arm replaced. Thanks!

Gears slip as opening window and closing, the handle assembly gear seems ok, all I see on crank is stamped word Truth 30818. Right side is that all I need to replace crank assembly. Please not this is a right side crank needing replaced but the photo is left side crank

I am looking for a SEMCO casement window operator with the number 31538, it has a "Rivet to Rivet" length of 8 1/4" for a 17" wide window.

Hi,I am looking for the hinge replacement for a left hinge (pic is of right hinge) casement window part (marked up in red).also the window crank operator and arms. The arms are 4" from crank to a 5 1/2" arm to the window. The straight arm (below the 2 arms) from sash to sill is 5 1/2" as well. There ... (cont.)

Window Operator Truth Entry Guard 40471 L30841

I recently moved into a new home that has a number of case windows with Caradco hardware. Four of the windows are not operating properly. I am able to engage the crank handle to open the windows, however when I attempt to close the window the handle turns out of the window crank mechanism altogethe ... (cont.)

Arm that hooks to the swinging window is 4 1/2"The arm from the screw plate to the swivel is 3 3/8"We need a right one and a left one pleaseThanks! Barb

I have 3 champion casement 8200 series windows. I need 3 RT and 3 LFT cranks and covers. Thanks Harrold

Please let me know the reference that I need to order to match the piece that is in the attached. I though the parts 39-171 and 39-172 will be good, but they are 1/2 inch bigger from the center. Could you please help me on this matter, and also which handle I need to order that fits. ... (cont.)

Hi, We are looking for two separate pieces of hardware. The first is the white window operator with rotating handle: Number ID found on metal arm - 31850 number ID found underneath base - 45251 and there is a number 2 stamped above number ID found on white rotating handle - 45054 the second piec ... (cont.)

Truth # 45251 on the crank Truth # 31850 on the arm

Hi, I recently ordered a 39-014 - Casement Window Operator, 13-1/2" Arm from your website. It works perfectly however it's slightly different from my old hardware. The old operator is flat across the top and this one is slightly thicker with a curved top (see attached photo). I was able to make it ... (cont.)

Please assist me in replacing the cranks shown in photos and crude diagrams. We believe the windows to be about 34 years old, Marvin brand. The broken portion of each mechanism is the rotating center part attached to the hand crank. It has come out, rotating on it's thread. It allows opening of the ... (cont.)