Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Having trouble making a positive decision of what replacement crank to order!

Simonton windows 20 years old. Number on back is C-1040-9A On swing arm there is F-1040-16 B

In need of a replacement, please advise. Thank you.

Hi,I'm looking for help. The crank was broken and only opens the window. When you try to close the crank comes out.Help.Maria

Do you have this handle or whole unit?

The short piece is 6 inches and the number on it is 30350 and is on both the bottom and top of window The long piece is angled as it goes into the crank area but the part that extends out is 11 inches The wide piece with the channel is attached to the bottom of the window and is 11 inches long. Part ... (cont.)

I need two replacement cranksfor my windows. I also need the handles for them as well. Pics 3001 & 3030 are to the right window . Pics 3031-3033 are to the left side window. If you look close there are numbers on the device. Take a close look to where the gears are located for each side and th ... (cont.)

Hi folks, The operator shaft has snapped off the base. I suppose I'll need to replace the whole operator. Please see picture. Looks like a Truth Entryguard 31538. There's an "L" on the arm. Please help identify replacement part.

I am looking for the screws that go through and attach to the knob on the window. My knobs need to be kept in place. The picture shown has the screw that goes through and attaches to the cylinder knob. Can you help?

I would like to replace my casement crank handles and the covers as well as the window sash locks in my whole house with black hardware. My windows are from Kolbe and Kolbe and the house was built in 1987. Can you find some hardware that matches this?

I am looking for a replacement worm gear for the casement window cranking assembly. No markings are visible.Thank you,Jim

Can you ID this?

I have a truth hardware casement window hardware which has 30905 stamped on one arm, but I can't seem to find one with the piece at the end of the arm that screws into the window frame. Any ideas.

Crank out window parts. Need right and left. Need this color. White will not work Numbers found 40942-a 40941-a 45135 40352 30905 Can you help me out Wayne

Hi, I need to replace several Left hand and right hand orientated True window cranks. There is a part number stamped on one of the arms - 20544. Would be grateful to know whether you sell a replacement mechanism as I have several which are non-functional. Thanks.

I need a window crank hinges on the left. Size of the arms: long: 12" + 1. The long arm has a bend on it. The short spur on the bend is 1 inch. Plus I would need a similar crank with hinges on the right. The long arm is 10" and the short arm is 8"+1. On that crand the short arm has the bend on it. ... (cont.)

Hello! I have some Weathershield wood windows I am repairing and trying to track down the hardware for. They are Truth Hardware. Any info would be greatly appreciated. Thank you.

Hello, I'm looking for parts for a left hinged and right hinged window to be able to replace. Numbers and words on the left hinged window mechanisms:TRUTH - I believe this is the brand20755 - on the top arm of the crank mechanism30744A - on the bottom arm connected to the window sill. Thanks!Logan ... (cont.)

I do not see any part numbers on any of these parts. We are needing replacement hardware to repair tis window.

Made in USA. Long Arm bears the # 40754 and short arm has 31538.