Viewing all customer Discussions for:

15-045 Pivot Shoe, 3/8" Thick

I am looking to purchase multiple spiral balance shoes from you but have been unable to find the proper clips in your web site. The shoes have a number on them of 200-794. from the pictures provided the clips are 1-7/8 " tall, by 1" wide and have a thickness of 3/8". I am looking for 14 of them so ... (cont.)

I have the MI 165/175 SH windows installed in my house. What I'm looking for are the sash stops I would use for this window. The products I am about to buy are: S900-29 75-033 15-045 I would like to have the white sash stops that would work with this window. Can you help me

Hi, Picture 1 shows the bottom square piece needed (with the hole in the middle) Picture 2 and 3 show how this piece is missing. Picture 4 and 5 show the hook I bought from you a while back for this same window. I know the kit may come with more than just the square piece, i will buy the k ... (cont.)

I was wandering if you have pivot shoe that is the same dimensions as the above with a brake.. I need 10 of them...Thanks Barry

I need help in identifying this pivot shoe. The dimensions shown were taken with a dial caliper. I believe these windows were made by Better Built. Thanks John

Please identify the pivot shoe. Thanks.

Two photos show one complete guide that is still installed and one that is broken on the counter. The measurements: 1 15/16 inches tall by 1 inch wide by 1/2 inch deep. Thank you!

i need a pivot shoe. i saw on line, 15-045. this looks same as mine, but mine is 2 1/4 high, this one is 2" high. does that make a difference. Also, i probably need the jamb spreader, but it is expensive. any alternative. do you rent them?

Need to replace spiral balance and correpsonding pivot shoe. Balance is 29 inches long and approx. 3/8 diameter. Seems to have a white or very light green tip. Pivot measures 1/2 inch thick, 1-1/8 inch wide, and 2 inches long. See attached photos of old balance and pivot shoe. Need help choosing c ... (cont.)

Please look at pics and help me select the parts I need for the Tilt window latch and pivot lock shoe. Pivot Shoe is 1 7/8

Could you tell me if pivot bar 26-379 will fit pivot shoe 15-045? Thanks, Greg

Hi, I need a few of these pivot shoe locks for some window repairs. They hook into a red nylon bearing spiral tube balance. If you need more info plaeas advise. Thank You Mike

I have aluminum windows which use the pivot shoe like your part number 15-045. 3/8x1x1-7/8" Many problems with spiral sash balance coming loose from the pivot shoe; it's a poorly designed shoe. Is there any other shoe from a different manufacturer that will substitute?

I am repairing my tilt windows. Everything went fine except, the old pivot shoe bar is just a little too big for the 15-045 shoe. the old bar is 3" long - 15/16" wide - 1/8" high. I am thinking of new bars???

Hi, I'm completely stumped. I have a pretty generic (unmarked) vinyl window in my house that had come completely disconnected from the pivot lock shoes. I removed the sash so that I could identify the replacement balances. Figured I should replace them. They are 29" long, 3/8 " with a red tip. Pl ... (cont.)

When I pull down on the left pivot shoe and let go it will stay down it fly's back up. Why is this and how do I fix this problem. Thanks for your help, Vicki

I need a pivot lock shoe for a Carefree vinyl window the is 15/16 wide x 2 1/4 high x 3/8 thick. The locking portion pushes against the back wall, not the sides. Thanks

I have attached a picture of my pivot shoes that I need to replace. Most of them are broken and will most likely replace them all to be on the safe side. The shoe (which also has a 200/574 stamp on it as mentioned above) seems to match the 15-045 model. They have the same measurements. My spiral ... (cont.)

I have aluminum single hung tilt windows and the balances and shoes are shot. It looks like yours will fit what are your thoughts?

Needing the springs that hold the window up and the clips the spring and window sash attach to. Call me with questions Ken