Viewing all customer Discussions for:

15-045 Pivot Shoe, 3/8" Thick

Could you check my photos and see if your Tilt Pivot: 26-361 looks like my broken piece? The measurements are spot on, so I believe this is the one I need. Thank you!

My friend, Doreen, has issues with her BetterBilt windows. Another parts company recommended we email you and see if you have the parts. Am sending pictures that my friend provided. Would appreciate if you call her between 12 noon and 5pm to discuss the parts. If no answer, please leave a messag ... (cont.)

I recently bought the Pivot Bar, 3" Product Code: 26-068. I also bought the Product Code:15-045 : Pivot Shoe, 3/8" Thick. The two do not fit together. The inside piece that the pivot bar is supposed to fit into is just a little too small. I would like to keep the piovt bar 3" and find another pi ... (cont.)

About 2" highx1"wide x 3/8 thick Pin hole about 1/4" wide. Thank you

I ordered and received the 15-045 Pivot shoes for the Keller windows I am working on. The shoe is perfect size except for the slot that accepts the pivot bar. It is a little too narrow. (I made it work by taking a pair of pliers and squeezing the pivot bar to make it slightly narrower) The Pivot ... (cont.)

I have a number of windows with the sash pivot bar rusted and broken both inside the pivot lock shoes and worse, inside the bottom of the window. I can not get the pivot bar out of the window or the pivot lock shoes. I think the replacement part numbers are 26-040 for the pivot bar, and 15-045 for ... (cont.)

Replacing pivot bar on single case better buit window

I am ordering balance springs and shoes. Can you confirm the color of tip to use? My current springs do not have any color coding. Length: 39" Diameter: 3/8" Sash weight: 19 lbs I am looking at series 900 sash springs and 15-045 shoes. For my single hung windows.

Good afternoon! I would like to replace qty 2 spiral balances for a tilt window. The diameter measures 3/8". The tip is blue. As shown in the attached pictures, the length measures 19 1/2"; I measured both balances to confirm. Which size should I go with? Also, I am replacing everyth ... (cont.)

Hello, Could you please identify a suitable replacement for these pivot bars and shoes. If possible we'd prefer any replacement hardware be corrosion resistant (i.e. stainless or some type of polymer) as these windows are located beside a salt water sound. Thanks, Eric

Hi, The window like in pic 5 will barely hold a position when open, so I thought I should place the spiral balancers. I ordered 4 series 400 35" spiral balancers last week and just installed two on a window. Window now can half-hold like pic5. I wonder that i may need to change the shoes too? ... (cont.)

Our home was built in 1981 and we still have the original windows. It has aluminum windows made by Better Bilt Windows, which is no longer in business. We have several windows that need new pivot shoes (see pictures). They seem to be most similar to your part number 15-045, but our measurement ... (cont.)

I believe it's a shoe I just don't know which type.

1) For a tube spiral balance on a tilt window, what's the difference between one with the green tip and one with the red tip? 2) For a 3/8" Diameter Tube Balance with red tip, I see you have about three kinds of 3/8" Pivot Shoes available on your web site. Does that mean I can choose any on ... (cont.)

I need a pivot balancer replaced. I will attach a picture.

Hello, I tried to post on the discussion board, but for some reason it wouldn

Just moving into a 1987 house. Most of the windows do not stay open and none of the Spiral balances have color tips. The window slide up and are 6'x 3' so each the bottom section which opens is 3' x 3'. Attached are pictures of the spiral and shoe. Also I do not know how to remove the shoe. The ... (cont.)

I believe part 15-045 may work. I would also need part 75-006 tool.

Window is aluminum, number on side of shoe is 200-794

I just ordered part number 15-045 3/8" pivot shoe and both pieces are the for the same side (left only). Is there a corresponding part number for the right side? Thank you.