Viewing all customer Discussions for:

39-139 Single Arm Crank Operator, 9-1/2"

I am helping do some repairs at a non profit transitional living facility for homeless families. This facility used to be an old hotel. There are several window operators and latches that do not work. Attached are pictures of the a right side operator and a right side latch (both side latches may be ... (cont.)

I am looking to replace 3 casement window cranks. They all open from left side.

The picture is the left side, we need the right side crank. The window is in a closed position and won't open. Can you identify what we need, found a tag that says Traco on the lock. It's cold out and they don't want the window open, so I can't remove it yet. So, if you can't identify I'll ha ... (cont.)

I am looking for Extra Heavy Duty Crank and Rail to replace the existing crank for steel window which is very old and very stuck. We replaced the original cranks with the ones you see in the photos, however most of them were broken because it is not strong to open heavy window especially when start ... (cont.)

Is your item 39-139/8 comes w handle? made by Truth HW? My lever is 9" long. Apparently no longer available, so I shall have to use the 9.5" I am trying to get the retaining nut-like part that embraces the warm gear under the handle. It gets loose and the warm gear comes out with it ... (cont.)

We have an order for 5 of each above operators. Customer indicated 9

We are looking for Anderberg parts and would like to know if you could help. 4 EA - Anderberg hinge 16 3/4 length 5 EA - casement operator (R) 3 EA - tie bar 4 EA - locks Pictures encl., Thank you so much for your help. Please let me know if any questions.

DO YOU HAVE ONE OF THESE WINDOW CRANKS FOR MY MILGARD WINDOW?

Greetings! Kindly give me an information if you have any manufacturer or suppliers of that window casement crank operator, single arm crank operator. Thank you

Truth window crank hardware needed

does this folding handle work with this operator? 39-139

I'm thinking I could use some of the cheaper, 9" options that match my existing mounting hole patterns (though my arms are 9-1/2")

3 cranks on these casement windows are broken. The Manufacturer appears to be Truth

Hi There, Are the 39-001&2 interchangeable with the 39-138&139 aside from the extra 1/2 inch on the arm? Are the 39-138&139 the heaviest duty versions you have for this type? Do the 39-138&139's come with handles? If not which ones would I order? Thanks, Rick

I know its hard to see from the picture's. When you pick up the operator it is heavy and solid not like the thin die cast. The one in the picture has a 9" arm that will work but 11"arm will be better. We will need 50 left and 50 right and will need one first for approval. Please no delays ... (cont.)

My name is milton Pls do you have this type of handle for windows id so pls advise . thank you and hope to ears from you

Number on underside of arm is 30050. Another number on another arm is 8D900P. measurement from gear end to end of roller is 8 3/4". Have both left and right to replace, and another window, narrower in width casement, but same gear mechanism?? That window also needs both right and left. Found a ... (cont.)

Truth case operator left hand

The base is 5 1/2 inches the first screw length is at about 4 7/8 inches and the second screw is at 4 inches. we are not sure how long the arm is or what degree of bend it has. Thank you!

Trying to find replacements part TRUTH 40049A 40224 40064 PAT. 4505601