Viewing all customer Discussions for:

39-139 Single Arm Crank Operator, 9-1/2"

This part is what we need however the length is too long. Is there the same one except with a 9 1/2" arm?

I need to replace the lock and closer on some old windows. Would you have these parts.Skip

I need to ID these parts on an old vinyl window Rt and lft flanking casements top and bottom hinges, sash track and operators. Thank you, Peter

I have 3 windows need a replacement

Need help locating

Who is the maker ? What is the part number ? Where may I find it ?

white, photos with tape measure. gear stripped, no longer opens when cranked.

The brand looks like Truth. The part number stamped on top is 30744. If you have the hinges then I'm probably going to want to replace the the seals and the crank as well.

Hello - I am looking for operators like 39-139 but need rear-mount. I saw a comment that suggested part #33-205 but I am unable to find that in your catalog. Am I just missing it, is it still available, am I looking for the right part number??? Thanks in advance for your help.

Good day. We are missing a window operator like the one above. The only mark is "Made in USA". the operator is 5.5" and the arm is 7-1/2" from the tip to where the arm angles. We need both left and right operators.

Are these operators still available in beige? Kevin

Hello, Do you stock the Allen-head fasteners for the 39-022 Crank arm?

Need to replace this operator. Not sure of the brand.Thanks,Matt

Arm says truth, and is 9 7/8 long.

The images are of a 1993 Metal Industries doors and windows operator. There are two screws on each side of the operator. The screw heads are outside and hold the unit to the frame. The operator is approximately 9" in length. Do you have an identical or similar replacement part that I can purchase ... (cont.)

I am about to purchase the 39-138 and 39-139. Do they come with mounting screws at all?

I have a missing window crank handle similar to the picture I have attached. please call me or email me if you have this replacement part. Thanks,John

Need a casement operator like one in the attached picture. The screw holes are 3 9/16" & 4 3/8". Overall size of mechanism is 5 1/2", with crank on left side on all the windows. The arm measures 8"from the elbow to the end. Could not find any names or numbers on window.

We are looking for replacement cranks on Kawneer aluminum window installed in 2003. The crank appears to be the same as the 39-139 with one exception. The fasteners attach from the back side and there are no visible holes in the face of the crank

Hello Swisco. Can you match this. I have new left hand but need opposite as picture of window shows. 9 1/2 ?. Truth. The # on left one is 40050 but need opposite I see pictures in your inventory but screw holes are from opposite side. Thank you. Bob Wambach.