Viewing all customer Discussions for:

39-146 Andersen Window Crank, 4-1/2"

Do I have to use Anderson or can I replace with swisco?

Hi, replacing a few operators and need help identifying the right replacement. Thank you!

I need replacement parts for 3 Anderson windows. 2 are the first image. Don't know whether 4 1/2 or 8 3/8 arm need 3 cranks also.

Looking for parts for this bay window I have a picture of the casement crank out on the left hand side that functions normally but the right side crank out is not functioning at all and I'm looking to replace that I also thought that I could find the parts for the closers as well they do work but i ... (cont.)

I ran into the open casement window while mowing lawn with my John Deere lawn tractor, the bagger caught the window, and has bent the mechanism. I was able to close the window by pushing it closed from the outside, but the window is not at all usable. A gap now exists on the lower half of the wind ... (cont.)

Not sure which series windows, since there are no stickers or codes anywere. I uploaded all parts, I have several windows. All very hard to open and close, house located off the dock so sea air and several years of no maintanance have made very hard to use.

The windows are hard t open, house sits off the ocean water, so could be the salt in the air, affected the operation, especially since previous owners didnt maintain the windows

Looking for these hinges

I am looking to replace broken cranks and window locks.

Crank 39-146 and 39-147

I can find crank assembly but not the stainless slide and plastic stop that fits in it? Please help. Thank you

Can you please identify these Anderson crank mechanisms to your part number so I can order thank you Joe

See photo

I have 3 Andersen clad casement windows that were purchased and installed in 1991 that have broken cranks. One is a right hand outswing as shown in the photo, and the other two are left hand outswing. The window size is 26" wide by 45" tall. Do you have replacement hardware?

I believe the pella windows are at least 20 years old . This crank is broken

ONLY NEED (1) FOR NOW. THANK YOU!

Hi, I am looking for two Anderson casement Window replacement parts. It looks like I need the whole mechanism to open and close the windows. Please see photos Regards, Joe

Hello. Looking to see if you have replacements for this Anderson window. My guess is it's from early 80's when the house was built. Thank you.

Larger arm is 6", small arm is 3"

Need to replace Anderson Crank hardware for right windo