Viewing all customer Discussions for:

39-155 Caradco Window Crank, 9-1/2"

Looking for replacement part. 80 stamped on left side 06 stamped on right.

Hello, I am wondering if this is a swisco part? I dont see any other ID #s or brands. If it is discontinued what would be the closest match? Thanks

Hello,I have two winders and one lock for my windows I need to replace. The windows were installed at the same time around the mid-90s I think, but the two winders look different. Please let me know if you have any questions,Thanks,Aaron

These 2 pieces are part of a casement window. I believe that they mechanics are Truth. Can you point me to these two pieces. Thanks!

Hello, Trying to find replacement assemblies for 7 windows, six of which open to the side and one opens from the bottom. All are marked Norco. Other markings are Entry Guard and 20755. Most of them broke at the bottom of the piece that goes into the gears and attaches to the handle. They are from t ... (cont.)

Hi, I have attached photos of an operator on another window that works. We are trying to replace same type of operator but with left side opening window (photo attached as well) because the operator (left opening window) is frozen/rusted. Can you help me identify the part and related crank etc pl ... (cont.)

Hello Experts,I have 5 casement windows for which I would like to replace the operator (crank), arm and track. The arm has engraved on it "Entry Gard Truth".I am also looking to replace some weather stripping for the windows.Thank you very much.Andy

need 3 of these

I need a replacement crank gear for a 26" x 35" Cantilever window. I believe it's a Caradco window and it is marked "Entry Guard II Truth 20755". Thanks so much.

Looks like a 7" shaft and a center operating crank handle.Questions/ call

Do you have this replacement

I had a local lumber shop repair 2 windows. They lost some of the hardware I took in and said some of the other parts were unusable so basically I need everything to connect these 2 windows to their sashes. Some of the numbers I can make out on the similar but reverse orientation window are 20755 an ... (cont.)

I am looking to replace the operator above. Can you point me in the right direction?

Do you need any additional Info? do I need measurements of anything? Windo size arm length???

After a big storm and -20 degree weather for a few days the crank no longer opens the window. It feels like a gear is turning over. But the part has the following text visible to me "made in the USA" "48" and "90"or"06" can't tell which one. But is this part from you guys? If not do yo ... (cont.)

I need replacement hardware for a Caradco casement window. The part is stamped Entry Guard 20755. Previous post by another customer looking for the same part was recommended 39-031 but was to check arm length. My attached photos seem to indicate a shorter arm length unless I am looking at it incorr ... (cont.)

One of them say AMS 6795 One is for the right window and another picture is for the left. We're looking to replace both.

Hi,Do you have a dual arm operator, cover and splined folding handle like those shown in my photo's?Thank you,Tom

The base that mounts to the sill is 2 1/8" front to back, 5" left to right. The straight arm is 9 1/2" long. The curved arm that extends to the right is approximately 8" long. Thank you

The name on the handle is "SEALRITE" The dimensions as best I can tell are 4&3/4" on the e3xterior arm and 5" on the inside crank. Numbers include 20755 on the upper arm and 31229 on the lower arm. Please not these pictures are for a window that opens to the left but the replacement I need is for a ... (cont.)