Viewing all customer Discussions for:

39-155 Caradco Window Crank, 9-1/2"

trying to locate new crank gear as a few of ours are stripped. The crank shroud is marked "Truth" and the only number is inside the handle "5054". Any help you can provide in identifying a compatible replacement is appreciated.

I have a casement style window that have damaged crank and slider mechanism. The photos are of an identical window's hardware. From that, I may be able to get the necessary parts to have someone handy fix the damaged window. If would want pictures of the same parts of the damaged window, I can also ... (cont.)

So, my name is Drew and I'm a project manager for a remodeling company in Charlotte, NC.During the demo of a recent project, someone decided to throw the window crank cover, as well as the lock cover, away.Research so far has led us to determine the manufacturer was Vista Windows. They were purchas ... (cont.)

I can open the window but there's not enough tension to close the window. The house was built in 1989. I can see WRIGHT on the arm operator.

Hello, we have four cranks that aren't working and we've identified them as KK brand - Is this something you can assist us with?

Hello: I have an older window that does turn to left or right, but the gears only turn to open and not engage to reverse and close the casement window. The handle indicates: Truthouter case for handle: CaradcoLong arm to window: Entry Gard TruthShort arm to window: 20755I appreciate the stock, SKU, ... (cont.)

Hi We have vinyl casement window that need dual operator with 9" arm 1996 year model Thanks

I placed a previous order and was successful with four of the screw mechanisms I purchased, but to were the wrong size (my fault). I need one left and one right of this size. Thank you,Kelly

These seem to be K K casement windows. Crank handle seems ok, I have some spares and they exhibit same problem. The gears inside the plastic housing seem worn. The metal is very soft, I found them packed with a very thick grease which I cleaned out for photos. The screw in the handle is a typical ... (cont.)

Hello, I have a semco window to repair. I believe the following applies to my window: Left handed Dual arm Surface mounted Detach clip on one arm Roller on one arm Stamped: Truth entrygard 30350 Do you have a correct replacement. it seems that I must remove a wood piece to obtain access to the ... (cont.)

I need to replace the operator in the above photo. The following numbers and names are stamped on the operator in various locations: 40254, 30710, 20544, EntryGard and Truth. I believe the operator is a 39-031. Please confirm that part number is correct. Thanks in advance.

Good morning, Attached you will find photographs of when the chronic operators I am looking to replace. There are a total of 4 windows to right and 2 left. If you need additional information please let me know. Thank you

Good morning! We are renovating an old church and they have Garadco parts. What do I need to do to replace this, or what items do I need? Any help would be appreciated! Thanks!

Per my contacting your customer service regarding the two window handles received and the one that is an incorrect fit, I was advised to send comparable photos of our current closer with the one that was sent. Attached are the pictures and order info. The two operators were for the same window uni ... (cont.)

The arm of the casement window operator keeps falling out of the window sash. It is a left-hand window. The length of the arm itself is 9 inches. What do I need to order to replace it?

I measured and the short arm was 3 3/4", long arm was 9 3/4, track was 11 3/8 with 4 screws so I was able to find that. From the outside, ash shown in pictures, the window opens to the right. What operator should I use?

Looking for a left and right operator. Cover looks like a truth operator. But one of the arms has like a "S" curve in it. Please see pics.

Hello! I am trying to figure out what hardware this is, the chrome is pitted and I would like to replace the chrome items with a bronze to avoid a repeated pitting in the costal condition. Can you please help me identify this hardware? Some of the windows have a truth logo on the armature, but I can ... (cont.)

Lincoln Window. Gut of crank seems to be stripped. Cannot close window must manually push shut to close and lock window. Extended double arms measure approximately 17 inches. (my best measurement) Thank you for your assessment!Alice