Viewing all customer Discussions for:

39-156 Caradco Window Crank, 9-1/2"

Mike

I need to purchase immediately replacement assembly (complete assembly) for several of my casement windows. Need to identify the correct P/N before placing orders. Please help expedite (photos sent already). Bob

Casement window is Twin light horizontal series 850.This is the left window and opens outside to the left when the cranks is operated. Standing inside the lock or closure mechanism is on the right side. The serrated shaft that is attached to the handle that comes from the mechanism is broken. The sh ... (cont.)

Hello,I need to replace a left-handed Truth Entrygard for my window. Crank opens, but no longer shuts. Opposite of what is depicted photos. Need left crank, not right crank. What part do I order?ty,F.

This says Entry Guard truth, metal attached to window is 11 1/4", arm coming out is Approximately 8 1/2 to 9". This window cranks out to the left when you ard facing it. What actuator would this be to replace it? There are (4) phillips screws holding it in place, but window casement is the way to ... (cont.)

Hello,I need to replace this Truth Casement Operator picturedhere. Do you have this in stock ????Thank youEdward

As you can see in the pictures, the gear mechanism for the swingarm on these discontinued certainteed windows has broken inside of the window, I was hoping I could get help identifying the part numbers and get a price quote so I can replace the mechanism.

Hi,Our home was built in 1994, we have a few of these window cranks that seem to be stripped. They will crank the window open but they won't crank it closed, it's as if the crank is stripped when you try to close the window. We had a local window company take a look at this hardware and they think ... (cont.)

Hi, I looking for a few of these Crestline window crank. I hope you can help. Thanks!

the gears to open the window do not work. Plastic casing over the gear and crank is Caradco.

Need the plastic round knob that goes on the end of the operator arm (the part that fits into the window frame). Looking from the outside of the house, this arm is on the left. Thankyou,

I need the complete mechanism to replace the one that is not working. The # on the old one is 20755. Also need the handle that fits it. I am sending a picture to make sure I get the right one I also need 2 more handles to replace the ones on the mechanism that have been replaced but old handles do ... (cont.)

Truth EntryGard I have two sets of windows in need of complete operator replacement. These pictured are both marked with R(assuming right hand window if viewing from outside), as the Left operators are still installed (I will need to replace those as well). The long arm is marked 40754 and the sho ... (cont.)

What are the replacement parts? For left and right? The arm is 9".

See pics... handle pushed out of sleeve...

I have a Norco casement window mechanism that needs replacing. This is a right hand opening (crank on left side of the window) window. The long arm has EntryGard TRUTH stamped on the top side and 40754 on the other. The short articulated arms have 20755 on the top side, where the end attaches to the ... (cont.)

Need this Truth window crank long arm 9 1/2 inches, short arm 3 1/2 inches. Can you recommend a replacement part?

I've attached photos what we are hoping to replace. Hopefully numbers on the parts help with making sure we are looking at correct replacement. Only concern is image 1432 (second pic). Want to make sure measurement is correct.

Will this caradco product work on my crestline windows?

Do you have a replacement for this? Thanks, Rich