Viewing all customer Discussions for:

39-175 Sash Crank Operator, Pella

I have a broken casement window operator. The only ID on the window is stamped on the sill track & is R 902 WC. This is an egress window and the dimensions are greater than the operator I've seen on this site. Photos follow - Thanks in advance if you can be of help.

Hello I have some old windows and this one doesn't seem to work, I believe I need to get a whole new mechanism

Looking for replacement non-egress hardware for a 1987 Pella casement window. Need top and bottom operator.

There are no markings found on the part and I could not see anything on the actual window. It is the left side of a casement window and I need to order a new crank and handle if possible.

Need a gearbox for a left hand and right hand opening window for Pella Windows. Also a hand crank for each one.

Hello, I'm looking for replacement parts for my Pella windows, which were installed in a home built in 1987. The window dimensions are 26 in x 71 in and 18 in x 45 in. I would appreciate your assistance. Thank you, Shawn

Our house was built in 1978, and we have crank-out Pella casement windows on our home's second story. We can no longer crank open one 30-1/2" x 40-1/2" window because the operator hardware is broken. You can see the broken gear in the posted photo. Is it possible to get replacement hardware for this ... (cont.)

Working on a remodel for a client that has an older model Pella window crank. The crank fails to close it securely. I took off the casement around the crank and noted that there's a notch on the moving elbow that should clip into the mounted bracket and pull the window closed. Haven't been able to ... (cont.)

Not sure what I need to order

I have both LH and RH opening windows that need complete hardware replacement. (Both open in opposite directions.) Looking for new opener hinges as well as the crank mechanism and the handle for each. One of the photos has approximate dimensions. I haven't disassembled it and taken pictures yet. ... (cont.)

Please confirm the Swisco replacement crank mechanism for a 1975 Pella wood casement window, 27" x 73". Also need the hinges and lock mechanism

Looking for bottom hinge. Showed part from other window. 2 screws to attach. If set is required, OK.

Pella windows, installed 1992. Looking for replacement crank mechanism.

Hi! I need this crank, arm and handle. Window opens from left to right

Most of the gears in these window cranks are stripped and no longer operate. I need to replace them but am having trouble identifying the exact part I need.I believe that these are the original windows in my house that was built in the mid 1980's

These are about 35 years old and some don't catch and completely close anymore.

Unfortunately I found no markings anywhere (looked at glass, sill, and everywhere else I could think of, but nothing found). Only thing I know is that these are Pella windows because the cranks have the Pella brand on it. Left window works poorly (crank is loose and only operates if I pull on it wh ... (cont.)

Looking for replacement or parts for window crank assY . The shaft is stripped .

This window crank is nameless brand. It looks similar to Truth Hardware Entry guard Dyad window operator. Probably code is 39-035, left sided.Wheels inside are intact. I need to fix the unit in P1 to be fixed to the wheels. How does the top the Y end sits closer to the wheels to rotate. DO I need to ... (cont.)

Hello, I have some pretty old Andersen casement windows, right and left. The rest of the windows were replaced but this original is still in good shape except for the hardware House was built in 40s, so these are probably early models. Is this enough to tell me what I need?