Viewing all customer Discussions for:

39-205 Truth Folding Crank Handle, 11/32"

The measurement of the outer screws on the base plate - center to center is 4-3/8". The measurement of L30841 bracket from where it's attached to the operator to the joint of the other bracket is 4" - center to center. The measurement of the bracket with the plastic wheel on it that says Entry Guard ... (cont.)

Need cover and screw to keep opening the window in place

i need one replacement window crank handle for a Jen Weld window installed about 4 years ago. It s a light gray and had the number 2119 R1 inside. The photos show a completed unit and the unit without the handle. I need just the handle.

We need the following: The piece that goes in the hole that the crank handle attaches two. 1 plate that goes on the window. 4 cranks

Can you please help me with these two window openers. Thanks.

I'm looking for this part of window

Looking for replacement hardware for two (left opening and right opening) Norco window crank openers. Not sure how old these windows are. The hardware is marked "Truth Entrygard". Not sure these match your part # 39-031 and 39-032 as the shorter arm, stamped 20755, measures 3 7/8" and said part actu ... (cont.)

before I start replacing the hinges with products from your company, I was hopeful you would guide me on how to adjust the crestline casement window. As you can see from the photo the bottom part of the window is not flush with the casement- I have included photos of the gap, hinges etc. I have a nu ... (cont.)

Looking for replacement Truth casement window operator hardware for Approx 2005 Marvin Windows. Existing operator is marked Truth 45241. Link arm is 4-3/8" overall length

Window pivots from the left to open clockwise. Single arm. Colors is like a bronze???

Need a right and a left window crank for a 1983 weather shield casement window. Can you help with a part number? Thanks, Jeff

Left arm is stamped truth 40011, right arm 40012. Looks like I will have to remove the wood over the mechanism to access the screws mounting the mechanism to the sill. Looking at product code 39-348. Is that correct? Will I also need the operator cover 39-107?

My window crank, which appears to be die-cast metal, has broken off on one side and I can no longer use the crank. It has a squarish adapter on the crank mechanism which is making it impossible to find a replacement. Not sure where to turn next. Please help.

Crank threads are stripped, window opens but can't close by crank. Hoping to go through and replace all in house. Windows ordered by previous homeowners so don't know anything more.

Do you have this part?

Window crank match.

We do not see any numbers, etc but we can turn the knob but nothing happens...seems everything is stripped. Would we be able to get something to fix this. Thanks.

Broken casement window handle

I have a Truth window in bathroom with left and right crank arms. Image4 reflects rusted lower arm. The crank arm also not functional as it turns without the window opening or closing. I attached images of right side window which show measurements of each part. Please let me know the replacement ... (cont.)

Hello, I have six casement windows (three right, three left) that have problems with the operators. For the most part, the issue is that the arm falls out of the track on the sash when attempting to open/close the window. In two of the windows the crank no longer moves the arm. Photos with measur ... (cont.)