Viewing all customer Discussions for:

39-259 VE Anderson Window Crank, Right Handed

Unable to find replacement hardware

We have a broken-ish crank on one of our awning style windows. One of the side supports is broken off so it isn't very stable in the window frame. Also looks like they may have drilled new holes and used different hardware from what was originally intended, so in not sure if a new crank will be plug ... (cont.)

Hello, I am looking for this window crank when looking at the window from the inside it is on the left, pics attached. Also need the device that holds the crank rods together , need 4 of them . Also looking for a double front door pin mechanism that sits on the side of the door that you lift up to o ... (cont.)

i need to replace the part pictured

No indication of names/brands/company on windows. There are pat. number on the Lower Link Guide (pat no 3444648); Operator D-198,20? RD. 1963 CAN. Window make a snapping sound when I attempted to screw in operator handle which came loose and would not close window. House built in 1980 in Florida. T ... (cont.)

Need replacement for this window crank assembly. Tried one that looks similar, but the lever arm does not have the same offset as this one. Stamped on the inside of the cover are: PAT. NO. 198202 U.S. R.H.R.D. 1963 CAN. On the back near the bottom mounting holes is stamped the letter B. No other ... (cont.)

The crank handle pulled out. Only identify inside "AT" 1999. Specs 6" height... cylinder 4 1/2" ...2 1/4 deep Looking for parts store. Can make repairs myself.

These windows were bought from Pan Am in 1977. We need one crank to be installed on the right side in a dark bronze finish. The inside dimensions are. 4. 3/4" high and 2 1/8" wide. Let me know what you think or if you need more info. Alan

Greetings- These are from 30 year old aluminum awnings. I can't find a name or number on them. I'll need 2 left and 2 right. Thanks for your help! Craig

I ordered 39-025 but the holes don't line up. I believe this is a right hand awning crank. The old one only has one screw hole on the bottom plus another a little higher on the right.

I am looking for help identifying the correct awning window operator replacement. The window is two horizonal panes in a bathroom with the operator on the right hand side. I cannot find any manufacturer identifying information on the window and the limited marking on the operator are or no help to m ... (cont.)

Right handed On base says RD. 1963 Pat# 190208 Says-92 inside box

Please assist in purchasing right hand operator with offset arm length 2 5/8" with arm hole size 3/8". Thank you.

I'm not sure when the windows were originally installed, but I know they have been there for over 25 years. There are approximately ten windows in this Florida room, only one of which does not work. I am able to open the window with the crank handle, but when I go to close it, the entire handle (cra ... (cont.)

This is the crank that is on my small bathtub, shower window in one of my apartments. I'm not exactly sure when the building was built, but I do know there is a pink tub and sink in one of the apartments which indicates to me it was built 50s to 60

I have ordered crank handles from you in the past, and the number in side the handle is REJHLHLJ2

These are cranks for crank open windows that are also emergency exit windows. I couldnt find any name or numbers on the crank.

Window Crank

awning window operator with only two mounting holes. All help appreciated identifying.

We purchased item 39-194 rh crank. The is clearly right-hand crank. We went to install, and new crank is off in arm angle just enough that it leaves a gap in window crank that it bolts up to. The bolt holes are also off from what are currently. Not sure where i go from here as i have 4 cranks that i ... (cont.)