Viewing all customer Discussions for:

39-504 SS 13-3/4" Channel Guide

We need to order several of these window cranks (both left and right). Also need to identify and order the window lock handle pictured. Can you please help us identify the parts so we can get them ordered? Thank you!

Roto, only marking is the letter B.

I need 3 left hand and one right hand

Looking for this operator

Hello, The pics are from an Andersen all wood casement. I need one replacement arm opener set. At the end of the arm is a steel circle that runs inside a 14" track attached to the bottom of window. Arm is approx 8-1/2" and does not fold. I also need 7 operating cranks for the same opener in bron ... (cont.)

I need to order from you and replace 2 operators on my steel windows from 1950s; one right side and one left side. I suppose they are 9 inch window operators which are shown on your website under Product Code 39-001 and 39-002, but I’m not sure. Please identify them using photos I uploaded. Al ... (cont.)

Do you possibly have this part. I have ordered 2 operator mechanisms already but they come without this slider with old one broken so can't be replaced

Single arm 7073b stamp

30818 , older window sliding arm seems to be about 8 1/2 in

No makers marks, aluminum, swings to the left, arm is 9 inches after the curve. Mounts via 4 bolt holes

This is an awning assembly needed for a rehab we are doing. I see something similar on your site but it has a shorer lever arm. Please adviseRegardsMark

I have old Andersen casement windows. There are two, one on each side of a picture window. The one on the left when looking from inside the house has a stripped handle spindle. The attached pictures are of the mechanism on the right when looking out from inside the house.

I have 2 crank i need 1 lh 1rh it mounts with 4 screws the mounting flange broke off

I just provided the photos of Right Part of the Window and I need 15 of them, as well as 20 left parts (that is absolutely the same size as right one) 15 Right Parts 20 Left Parts 1) How much will it costs for all of the parts? 2) How long it will take to deliver the parts to Brooklyn, NY 11229? ... (cont.)

Casement window crank rear mount. (Truth window part) Five pictures of my window crank assembly. Would you have a part number to replace this crank assembly?

Needing whole operating assembly kit. Handle, crank, arms, fasteners, sliders and mounting screws

The right hand mechanism has a rusted swing arm. I would like to replace both of them,

Do you have a replacement handle and extension that will fit this window crank assembly? The current handle sits too close to the granite. Thanks

Does Swisco have a casement window operator that can replace the Anderson 7074B?

Please review the photos and confirm which operator will work for my application. It looks like #39-001 and 39-002 is a match. However, #39-045 and 39-044 also look like a match. I couldnt find any identifing markings on the crank/operator, The home was built in 1952. I didnt measure the hand lock b ... (cont.)