Viewing all customer Discussions for:

39-504 SS 13-3/4" Channel Guide

Need a replacement for the metal crank/opener and all metal bars that attach to it and the window itself (pic 2) The metal rail that holds all the pieces and screws into the bottom of the window frame is 9". Also need 2 plastic handles plus the piece that goes around them (like a picture frame, pi ... (cont.)

My example has part number L.H. 5565. my mounting holes are 4 1-8" my gear center to pivot arm is about 9. 3/4" I see you may have a suitable replacement part, please confirm. I'm a professional restoration contractor.

I am looking for replacement cranks. My house was built in the mid 50s. They are stripped and won't close all the way.

FMS co A 90 LScrew spacing is 4 1/8"Approximately 1951Arm is 9.5"

cant seem to find the identical part. the windows have no markings as to brand name. crank mechanisim has no visible markings as well. looking to replace with OEM if possible. I am assuming the windows to be about 20 years old.

The crank only opens the window an inch, then it "wheels" into emptiness as if it wasn't latching onto the mechanism. truth hardware anderberg mfg

Looking for a replacement for this window operator. I don't see any that have an 11" arm, but I think 11" or 11 3/4" will work. Also, I don't see any with a 1/2" square nylon slide that matches mine. I think a wheel will work, but I'm not sure whether another attachment style wold work better. ... (cont.)

We have a entire building, built around 2006 that has operating problems with each window, ranging from closing weird to not closing etc. The building is in D.C. We took apart the hardware from one to try to figure it out and fix it but we need to order a new track so we can actually test if a new o ... (cont.)

Hello - Our home was built in 1970. We believe that the kitchen casement window is original. It is a double casement 52" Wide X 42" High. The windows do not crank open unless we push on the glass while opening. We are looking to replace the hardware on both sides. We would like the inside levers to ... (cont.)

Do you carry this handle replacement for four aluminum windows (opposite cranks). I see you carry replacement tracks that supports the round fitting.

Greetings from E. Tennessee!We need to replace numerous Window Crank/Gear Assy.'s for our Anderson Casement windows and I would appreciate any assistance in selecting suitable replacements.I have attached numerous photos for examination.Anderson Crank/Gear Assy. # 7073B Left & RightLength of Arm ... (cont.)

Please identify the parts I need to replace existing casement windows hinges or operating mechanism.

I have the truth payment window, but the crank no longer can grab the window and close it. I have to manually pull the window close every time. I want to replace whatever is necessary to make the window operational again Gene

When cranking open the windows the part that moves the window open and close while cranking,falls out of the slotted track on the bottom of the widows. And the crank is slow to respond-nearly two full turns before window begins to move. Do you have replacement parts? The part numbers are on top of t ... (cont.)

Any ideas?

This window fell out when I opened it, and I'm trying to identify what hardware needs to be replaced. The parts are made by "American Metal company." Thank you!

Hello, I am trying to locate this operator, and snap stud braket...

Hi, looking for a 12 5/8 inch track for crank window. Do you have this length?

Need some cranks for house built in 1970. Replacement ones I've gotten so far are either too narrow to fit on the sleeve or do t go all the way flush to the base. Part number 60-c-7041-62 with small 6 below. Many just need the knob but have heard can't get knobs alone. Thanks

Need a left and a right side