Viewing all customer Discussions for:

39-505 11-3/8" EntryGard Track, 4 Hole

Casement windows installed in 1987 - still original hardware - TRUTH Issue: The operator arm that goes to the track on the window falls out of the track...the wheel bearing plastic exterior looks worn, and the arm does not seem to have any tension to keep the arm in the track. The track on the wi ... (cont.)

I have two (2) non-functioning Truth Window Operators. One right and one Left. I'd like to find replacement operators for these windows. They will open the windows, but both cranks back out of the stem instead of closing the window. Can you tell me what replacement model I would need? ... (cont.)

Hello, we are in need of a crank out window crank, all we tell you about it is that the guide which is still attached to the window is 11 1/2 inches long, the opening in the window where the crank goes is 4 inched wide, the mounting holes that are visable on the window are two sets, the holes furthe ... (cont.)

Looking to replace this pella operator. I'm told it's 1960s. The arm measures 16". Thank you!

I'm looking for these parts for the top and bottom of the window. Part numbers I can see are 33177b and 30744. Not sure what brand window is.

I need to replace an operator. It would be the opposite side of the one shown. I am not sure the length of arm I need. ThanksJoe

I have Crestline Casement windows and need 2 right hand and 2 left hand operators. - They are all of the single arm variety. - The total single arm length is about 9 inches. - The body (where the gears are located) is about 5 inches long. - The operator looks identical to your 39-216 and 39-217. ... (cont.)

I am looking for a replacement worm gear for the casement window cranking assembly. No markings are visible.Thank you,Jim

Need help on entry guard truth window crank. Can't seem to find right one have bought 2 and had to send back.

I need a window crank hinges on the left. Size of the arms: long: 12" + 1. The long arm has a bend on it. The short spur on the bend is 1 inch. Plus I would need a similar crank with hinges on the right. The long arm is 10" and the short arm is 8"+1. On that crand the short arm has the bend on it. ... (cont.)

Not sure which piece to order for replacement

Hello. I have a casement window, barn door style. One side is missing the rail that pushes and pulls the operator arm to open and close the window. Arm numbers and inscription includes Truth 30818 Entry Guard

I am looking for a SEMCO casement window operator with the number 31538, it has a "Rivet to Rivet" length of 8 1/4" for a 17" wide window.

I am looking for this part. Your suggested replacement part is 39-031, but that part has a nylon wheel and mine has a metal disk. I believe the nylon wheel on your part, will not fit my track. On the back,on my the long arm, the #40753 EntryGard Truth is stamped. On the back of the shorter arm th ... (cont.)

Hello, Looking to replace some stripped hardware for windows in a house we plan to sell in 1 year. As shown in the photo the numbers on the hardware are 40942-A.

our L hand operator is C-1081-101 with long arm S-1081-102 and short arm S-1081-56our R hand operator is C-1081-201 with long arm S-1081-202 and short arm S-1081-56are these operators still available?

Hello, I have customer with Marvin windows possibly 20 to 30 years old and various styles.I need window cranks LH & RH with crank handles and covers.I need proper parts for these, do you carry them ?Ed

Looking to identify part numbers. I believe the manufacturer is TRUTH. any help would be appreciated. There are 7 parts.. uploading them in two posts since the site only accepts 5 at a time. Tx

Hello, looking to replace this operator. Need several. Many thanks.

Hello my name is Dennis I'm looking for a proper match for two awning window openers. I believe they are right-handed and I did see a number on the bottom when I took it out and that number is 40754 and I also seen a number 14 located on the bottom in a slightly different area and I believe the col ... (cont.)