Viewing all customer Discussions for:

39-505 11-3/8" EntryGard Track, 4 Hole

Two windows that open from the left as you face them have roller wheels that come out of track. A) metal track at base of window is 11" and Truth & a house icon is on the track (see pic); B). Arm from wheel to crank is approximately 10"; C) top right piece of hardware towards window is 4 1/2".N ... (cont.)

Hi, Im trying to repair some casement windows that the bottom style of the sash has rotted and some of the pieces have rusted out, and some seem to be missing. The crank mechanism is an EntryGard 20810. I have a left, and a right casement on this window. Can you help me identify the bad and missi ... (cont.)

Please see photos, looking to purchase part. Looks like the Gear is worn on the existing part.

Hello,From checking your site I believe the sash locks replacement would be 38-097 LH and 38-098 RH with new keepers 38-079.However, for the window operators (which I confirm is 9-1/2") seem like 39-027E and 39-028E just not 100% due to the fact the cut sheet on the Ellipse does not show the width o ... (cont.)

Hello- I have some old Anderson windows on a building and I need right and left cranks and handles. Please advise.. I also need handles for existing cranks.

Need a couple of replacements

Please check attached photo and advise if you do have it

The window crank keeps coming off the track and therefore won't close the window unless someone is outside pushing it closed. Can you help me find the right part to replace this? I can't find much in the way of markings on them, but I am at the property for the next few days so if you can point me i ... (cont.)

The original is the operator stamped townside is the original, on the opposite it is stamped 'entry guard truth 40754'. The operator is the one I ordered as a replacement. Everything works well with this operator except that the ending of the arm is not the same bushing. Is this something that ... (cont.)

I have two windows that have broken cranks. The cranks work, they just won't stay connected to the windows. Thus, they open, but won't close. I'd like all new cranks and attachments but have no idea if that's possible. I have not removed them as I would then be unable to close the windows. I've ... (cont.)

Looking for replacement...this item is broken but will probably need both left and right to be same look. The arm is 11 1/4". Thanks for input.

I'm trying to identify the parts needed to replace the opening mechanisms fore these windows. Some will need need replacement of the tracks under the window (where the opening arm/wheel fits into), but I do not have a picture of the track.

Hello There,I would like to replace both ( Left & right ) of my CARADCO casement window operators 9-1/2" parts. The original parts have been working since 2000 with a single arm model as shown in the picture attached. Could you please advise me if is it possible to install the Caradco double ar ... (cont.)

I would like to replace all parts but want to make sure I have the right ones thanks for your help Clay

Hello! Could you please help me select correct replacement hardware and handles for these windows? The long arm length is 9"Not just the arm mechanism, but what else would I need? Crank? Covers? Those metal plates that screw into the window? Can I use any screws to attach? As you can see these are p ... (cont.)

Aloha, We have some old windows that have a handle that slips on and then we have to awkwardly crank the window open. (handle like this: https://www.swisco.com/Wood-Casement-Window-Operator-Brass-finish/pd/Casement-Window-Replacement-Operators/39-268) we would like to retrofit it with some handles t ... (cont.)

I am looking to replace my arm operators in two casement windows. It is looking like it will be both the 39-031/32. My question is... do these components also come with the tracks that are mounted on the window themselves? Mine are very rusted and looking to get them replaced as well. ... (cont.)

Please see the attached pictures of the replacement parts and the actual window. I am having trouble identifying what type of window it is to. I would like to order the replacement window parts & sash not entire window unit. If you look at the etching on the window, it has your SNE part identifica ... (cont.)

Caradco LH crank assembly. My identifier is CARADCO printed on the screen photo Thank You, Dennis.

Hi, Can you please identify what crank this is with the long arm? Thank you