Viewing all customer Discussions for:

15-111 Pivot Shoe, 1/2" Thick

the height of the coil housing is *3 1/8" from the bottom screw to the top of the plastic guard. the window channel is approx. 1 3/8" wide x 9/16" deep. based on your formula, i believe these are 15 lb. balances.

Please identify this part.

I need to replace the balance in my Simonton Luminess windows. I've included a picture of a working one and one that is missing the cover. I hope that is good enough. I'm afraid to take apart a working window because the last one I did shattered the balance pieces and I couldn't get the window close ... (cont.)

I am in need of parts for my windows they are simonton windows I need balance coils,coil covers, privot blocks

Looking for a replacement for this coil balance.

I ordered a new balance for my Simonton Double Hung Window bottom sash according to Simonton it's a Luminess 400 series. I found the following info on the bottom sash (hope it helps 3/10/00 2cwp , sash bottom , HS 17 LPDH WI 27.375 X 24.063. I placed an order with Swisco to replace ... (cont.)

The attached picture came from vinyl window that's around 15 years old.

Hi, I don't know any other information, it looks like double spring coil. Could you tell me which type coil I should buy? Thanks, May

Plastic housng for the coil dried up and cracked into pieces.

can you please help me find this Tilted window coil spring Jeff

i bought your: S140-23 coil balance the ones I have pulled out are labeled: 3.0 35" P (there are 2 of these coils) and 4.0 35" P ( there is 1 of these) I have already installed what I ordered but the window sash is not moving without me using a ton of force. Also; I installed the new coi ... (cont.)

Hello, I have a couple windows that need a new coil balance. The only information on the windows I can read is that they are "Simonton" windows, installed in 5/1997. I'm pretty sure they are dual coils (I see two coil housing spots at the top, with the coil bands pulled down the sides). The coil and ... (cont.)

I am trying to obtain replacement balance shoes for several windows. I am having difficulty determining which parts are required due to many factors. Any help would be appreciated. Thank you.

Im looking for a replacement pivot shoe for a dove window. Looks likes its 17/32" thick by 1-1/4" wide by 1" high. The ones that look like it are 1/2" thick (15-111 and 15-191) will those work? or is there one thats 17/32 thick I can use?

Please help find this part for my window.

ONE PICTURE IS OF BROKEN PART AND ONE IS NOT BROKEN. THIS IS THE PART THAT THE PIVOT ROD AT THE BOTTOM OF THE WINDOW INSERTS INTO WHICH I ALSO NEED. I WAS HOPING YOU COULD DETERMINE WHICH PIVOT ROD I HAVE ALSO. I CAN GET THAT INFO LATER IF NEEDED. I WILL ALSO NEED THE SPRING CYLINDER BUT WAS U ... (cont.)

These are 2 balances which I took off a simonton window,I'm not too familiar with window parts. Is this something that you may stock.I'm not sure of the sashes weight I hope you can help.

Hello, I am a landlord in Jersey city. These parts are in windows that were installed about 10-12 years ago in a building I just purchased. Can you help identify these as I need to do repairs on numerous windows.

How do I identify my specific Acan window? The windows balance/ballast mechanism is broken and there is nothing to hold it up. Other windows in my home are very difficult to open. Is there a way to duplicate this or should the ports be replaced? Do you have the replacement parts? Can I send a pictu ... (cont.)

Please help! Trying to find this part.