Viewing all customer Discussions for:

58-008 Prime Door Seal Set

please advise me for some replacement weather strip about 7 feet long, fits into a slot in the door jam. see picture attached Also how do you remove the old seal and then install the new one. Does it just pull out or must you remove the jam and slide the new piece in. And then how do you remov ... (cont.)

I have been able to identify the Stanley imprint on the hinges of the patio door at my sons' house. The door is wood interior and metal exterior. The weather stripping on the metal threshold has deteriorated and vacated. I cannot find any other markings any where on the door to identify it further. ... (cont.)

Will 58-008 prime door seal set/weather stripping kit work on a Therma Tru entry door?

Hello, I want to make sure I am ordering the correct part for my door. Presently there is magnetic weatherstripping on the right and top sides of the door. Please see enclosed pics. Do you have this in white? The length I need is approximately 79" for the right side as that piece is tearing from exc ... (cont.)

The weather stripping for my Stanley exterior door is tearing away. Can you identify the correct replacement? Pictures are attached. The following numbers and description are on the door label: 1/3 HR 4BC43-2 1CBO No. 2589 CSFM A-3300 354:1 Thanks for your help.

Looked on your website for kerfed Door weathering stripping replacement but not sure which one to select. Attached are three photos of the weather stripping used on my two outside entryway doors. Would appreciate your help so I can place an immediate order.

I need a replacement door (casing seal)for my door. I have attached photos. Thanks!

My weather stripping on the magnetic top and side measures 1/2" wide and compressed thickness measures 1/2". This differs from your dimensioned drawing. What would your recommendation be. Thank you, Neil

I think the door is a Stanley. The only differences between my weatherstripping and your 58-008 seem to be: 1) The compression seal is a different shape, although the measurements corresponding to the 58-008 are the same; and 2) The 16/32" dimension on my photo is larger than the 13/32" dimen ... (cont.)

On your product, 58-008, magnetic weatherstripping, can you confirm the compressed thickness of the latch side of the strip? I purchased a set from another supplier and had it installed, and the thickness when compressed (door closed) is too thick, so I have to press on the inside of the door to cl ... (cont.)

Can you help me identify the proper replacement weather-stripping ? I have a metal Stanley door with a solid glass insert. Thanks, Bryan

This magnetic weather stripping is very popular. It's used by many door manufactures, and I do believe Stanley did use it. You will have to match yours up to the website to see if the 58-008 will work in your door or you can send pictures of what weatherstripping you have.

Hello, Would you be able to tell me whether the picture of our front door insulation matches your 58-008 seal set, please? The dimensions are the same, and it looks like the picture from what I can tell. Thank you very much for your help! Simon

Where can I find black weather stripping for a stanley metal door?

Is your weather stripping product 58-008 made out of rubber or vinyl? I have seen a similar product in vinyl by frost king and it looks so flimsy.

I have two different steel doors in my home with similar weatherstripping that needs to be replaced. 36" STANLEY DOOR: Magnetic weatherstrip on top and latch side of door base extension: 3/8" height (distance on other side of base extension): 1/2" width (distance perpendicular to base exten ... (cont.)

Hello, I have a Stanley Door manufactured in 1985, and the only numbers I find on it are 970327B. I need to replace the weather stripping -- all of it. I've attached a few photos and would appreciate it if one of your experts could let me know what I need to order. Thank you! Best Regards ... (cont.)

I have been unable to find the magnetic weatherstripping in the photos for a Stanley Steel Entry Door. It measures approx. 1/2 inch thick (from where it meets the door to where it is attached to the lip. It measures approx. 3/8 inch wide. I would appreciate any information you would be able to gi ... (cont.)

Stanley Prehung Metal Door Weather Stripping 98038-05-01 accordian style rubber material 3/8in wide 7/16 deep 1/4in compressed 3 pleets

I have a Sears storm door #948.65103272 65103 027 and I need the magnetic weather stripping kit. Do you sell this item?