Viewing all customer Discussions for:

58-042 Gray Pile Weatherstrip, 7/32" x 5/32"

Hello, I'm looking for a replacement of a pile weatherstripping for my older aluminum sliding windows (these are very common on homes in CA). I measured the width of the strip and it is 1/4"; however, I can't identify the height of the pile should be greater than 0.160". Do you have any of these ... (cont.)

Trying to get what you believe are the correct measurements so that I can place an order. Thank you kindly for you help.

I believe this is part# 58-042, but wanted your expert opinion. Thanks

Thanks for the help. I hope you have our size..

I am trying to figure out which wool pile is needed to replace the worn/missing wool pile in my windows. I believe they are Ideal windows but I am not sure. I attached pictures of the wool pile from the window in the 4 pictures. I already purchased 13 rolls of Gray Pile Weatherstrip, 7/32" x 5/32' ( ... (cont.)

Looking for the weather strip on the right of the picture of two side by side. I was sent by my boat manufacturer the one on the left with has a base of 1/4" which is too wide. I am looking for a pile with glide that has a height of about 7/16" and a width of I would estimate 5/32". I would be go ... (cont.)

Gray wool pile black in color not sure and not sure of the size or length.

Please find model numbers and pictures. The condition of the existing weather stripping is such that I can't tell if it one piece or two. I would like help identifying the replacement part(s) and instructuctions on how to install it.

Hi could you help me identify the sash guard for my window. It is 1" square on top - All other dimensions shown on the photos. These are old aluminum windows and most of the wool pile has been worn away, but i have picked one of the best examples for the picture. Could you please help me ident ... (cont.)

There are no identifying marks on the windows. They are approximately 17.5 years old.

Hello, I have a home with a lot of windows manufactured by MI Windows with 4300CHS series. I am looking for Wool pile weather stripping replacement for these windows. Can you please suggest the size needed for these windows. Thanks Kiran

I have 9 foot by 3 sliding doors there 2 screens and 3 glass sliders. If you can tell me how much weather strip I need from the pictures. Also the what parts will I need to change out the rollers on the glass sliders? Also on the screens the rollers are steel 1 1/2" will the nylon rollers work in pl ... (cont.)

Nightmare scenario - I tried 58-127 first but it would not thread into the slot. Then I tried 58-042 and it fell out of the slot!!! How can that be when the former is narrower than the latter? See pictures of the seal slot with uniform swages the length of the track. Are those normal? I had a ha ... (cont.)

This is the seal next to the bottom rollers along the entire width of the door.

I ordered the Wool Gray Pile weather stripping. Are these sold in 25 foot long pieces?

I need the insulating strip for Acorn Atherm Sliding windows. I have included a photo of one of the work out strips. There is a center strip in the wool and I am thinking that we need the 58-042 wool pile strip. Can you confirm that this part number will fit the Acorn Atherm sliding windows. ... (cont.)

2 types. v shaped goes on window sash and the other style goes on the window frame itself

I have a house that was built around 1960 with a 4-section patio door spanning 20'. The 2 moving sections haven't really worked well since I bought it about 3 years ago. I took one of the doors off and saw that the small gears of the aluminum ratcheting mechanism are worn out, preventing me from adj ... (cont.)

I am looking for window seals for Viking horizontal sliding double pain windows in plastic frames. The seals are gray, wool pile seals with a flat bottom which fit into a groove approximately 5.5 mm (7/32") wide and 2mm deep. I need a total length of 50 feet. Please, let me know if you have the s ... (cont.)

Hello, I received the rollers you guys helped me identify and they're perfect. Now, if you can help me find the correct wool pile and bubble seal, I'll be back in business and, once again, have a sealed and quiet door. Attached are four photos showing the pile slots and cross section of the 'square' ... (cont.)