Viewing all customer Discussions for:

58-126 White Pile Weatherstripping, 9/32" x 11/32"

Good morning, Ive uploaded 3 photos. We need some weather stripping about 1/4 inch wide. I just need help identifying the proper one. Ty.

Hi, I need help finding a suitable replacement for my weatherstripping.

Hello, I have about 8 32x54 double hung windows I purchased from Home Depot, under the name American craftsman, back in 2002-2003. I am looking to replace the weather seal where both the upper and lower sashes meet and lock. The attached pictures showing the white seal is on the lower sash. I believ ... (cont.)

Hello and thanks for your help! This grey strip shown in the photos Would this be 3/16 x 1/4? Thank you!

Hello, I have windows from "CenterFeed" company. As you can see in the pictures these are double hung sash windows. On the lower sash, I need to replace the wider wool pile. It is so brittle and old that if I try to remove , it simply breaks. I am unable to measure the height and width of it. I ... (cont.)

Base is 9/32 long and brush 5/16 tall Has a thin piece of plastic running through it

the plastic part measures exactly 1/4" The brush? is approximately 3/8" high

The weather stripping slides into the slot on plastic piece. Picture shows side with weather stripping top of door is with out.cant find right size. Plastic piece of weather stripping that slides into holderis either 9/32 or 5/16 I think. Fuzzy part is like 2 pieces with plastic in between. Are the ... (cont.)

Seal for Sliding Patio Door Desired - white pile weatherstripping with flat material/paper up center (Fabric ?) See picture - actual measurements (could be slightly worn) 1. plastic base width = 0.271" (6.9 mm) 2. pile height = 0.409" (10.4 mm)

I can see daylight on the sides of my windows, Where the filth seal or packing is. It looks like it needs replaced. How do I go about getting old Felt out? And how do I know what thickness felt should be?

Hello, please see the attached pictures, I need replacements for these parts. The upper coil housing has two coils in it and has '11' marked on it. If you have these parts, please let me know the price and availability. Also, do you also sell the seals for these windows? They are of the "T" type, wi ... (cont.)

9/32 x 9/32

Hello, I've messaged you before regarding some of these parts, but I'm still looking and have some more info. The first pictures are a channel piece we had trouble identifying. I recently noticed that they have the number 0132 moulded inside. I found a local supplier but he was charging more than ... (cont.)

Trying to replace pile weather strip

Hello, I'm looking to replace my weather seals. They look like they measure at 1/4 inch wide across the base. I was thinking 3/16 would work.

Hello. I was wondering if you help with a pile seal. Looks like 1/4x1/4 and no other marking

The "T" part of the strip is 1/4" not 3/16". I can not find it on your web site. I contacted the manufacturer and they gave me your name. If this can not be replaced with a like item, any suggestions?

Need help with (bubble seal) I order the pile weather stripping 58-099 which is 9/32x5/16 that fit in the Channel because it is 9/16.but the bubble seal I order was 3/16x5/16 that doesn't fit in the channel it is to small can you help me with the Right bubble seal the will fit only one I see that ... (cont.)

looking for above part to fix my sliding door