Viewing all customer Discussions for:

58-126 White Pile Weatherstripping, 9/32" x 11/32"

Trying to find this weatherstripping. The door is a sliding glass patio door. I cannot find the name of the door mfg.

Greetings, I was asked to send pictures and dimensions for a weather stripping I'm looking for. So here you go. Dimensions are as follows, the strip on the bottom is .27" wide and the total height is approx. .335"

hello, I want t order the correct size weatherstripping and i'm not quite sure on the size/part #. Please advise. I am including pics. White pile/ with fin. Thank you.

Request #36375408 Need weather stripping for sliding glass door and probably latch hardware

Hi, I have vinyl double hung tilted window. One of it's tilt bar (see attached) broke recently. I am also trying to replace white wool pile weather stripping (see attache) and bubble seal (see attached)on this window. I have looked up your website, but not finding exact match replacement, special ... (cont.)

Modsel #TR-1200 Patio glass sliding door. Need gasket for under sliding door. Felt width 5/16" Plastic bottom width 3/16" Overall width 3/8" Robert

Hello. I am at a loss. I am trying to replace damaged and worn seals on a 50 year old mobile home door. The rubber fits into a t-slot, with a pointed end that touches the door. I attached a photo of the profile with measurements.

Hi, Do you have anything in your inventory which best matches the t-slot profiles in the attached pdf and pictures? These are gaskets used on a 1960's wildcat travel trailer. Let me know if you can help. Thanks! Alan

I have two 6'8"h x 8'0"w sliding doors with sun and weather-degraded weatherstripping. I've attached a diagram of the track the weatherstripping is installed in. I would say the dimensions for the overall slot depth of 0.08" and the opening width of 0.175" are accurate. The bottom slot width of 0.2 ... (cont.)

Please help suggest, I am looking for two different seals i have in my double pre hung window, the first window seal attached 1087-88-9 slimier to 58-164-5 but unsure it fits another product ( 2nd gasket is ) Wool Pile that i need as 2nd part that go around to make air tight. image 1090 and 96 Th ... (cont.)

Hi. I'm looking to replace weatherstripping on a 35 year old wooden sliding glass door. My best guess measurement,since the current weatherstripping is shot, is 1/4 wide X 5/16 high wool with center fin. Is this possible?

I have some Traco sliding windows and need some felt weatherstripping. The plastic base is 1/4 inches and the pile is 7/16. Hope this is enough info for you.

I'm replacing weatherstripping on my 35+ year-old aluminum windows. The track in which the window rides appears to be 1 1/32" wide (maybe 1 1/16" in some places) and the windows themselves are 7/8" wide. The windows take pile weatherstripping in 9/32" channels on both the inside and outside. 1. W ... (cont.)

Do you carry weatherstrip like this? Our house is a modular, built in 2009, the door is aluminum. The opening of the metal strip is about 1/4". I don't need the metal part, just the rubber weatherstrip. Thank you very much.

Wool Pile that appears to have a 9/32" width and 3/8" height (maybe eve 7/16" when it was new) with a center fin seal. This is for a Crestline sliding door.

Hi, I need to replace the weatherstripping on my windows, and it seems that the existent weatherstripping has a base of 0.25" wide but, the pile that faces the outside is taller ( 5/16" ) than the pile around the window facing the window frame (0.25" ). I have 17 windows, 2 panes per window. Each ... (cont.)

Hi SWISCO, I have old vinyl windows that has the Foam filled with a plastic "T" base weatherstripping. They are pretty beat up and need replacement. Should I replace with foam filled or wool with center vane strip? My windows do not seem to have a consistent gap so maybe the wool would fill the i ... (cont.)

Hi Swisco. Here are some photos of the weather stripping I need. 1/4 inch for the slot and as you can see by the photos the part that goes toward the door is 3/8" and there is a plastic divider in between the two sides. Hopefully you have it. I don't care what color it is. Either gray, black or whit ... (cont.)

I need Gray Wool Pile, 9/32" x 3/8". I can't find it in your online listing.

I am looking for 2 sizes black or grey finned wool pile stripping... 9/32t x 9/32t x 21 feet 9/32w x 3/8t x 26 feetCan I order this? I did not see anything that had compatible measurements that were the same color and also finned. If I can order them, what is the price please?