Viewing all customer Discussions for:

70-009 5 Pack, Screen Plunger Pin Latches, 5/32"

Need two of these for a small window screen. I believe there was a small spring included with this part also. Thanks

Looking for how to size and select which plunger pins I need. Screens came with Weathershield windows installed in 1995--so I need to replace a lot of the pins.

I have ordered this latch set and need a pin to secure it to the screen. Do you have that part? Thankyou, Pam

hi I need replacement clips for all my double hung screens. They are all double hung aluminum frame for the screen. I got these very very long ago maybe 2002-2004? I am not sure. the must have a spring to catch the screen and attached to the window frame. These are all falling out now from the wind ... (cont.)

I am trying to find the correct size screen window plunger pin. As you can see by the photo, the black pin is the original which I am trying to match. The silver pin was bought as a replacement but is too small to fit the holes in the screen. The screen and window are a K&K 14 HD. Could you off ... (cont.)

Hi, is it possible to obtain a pin similar to the 70-219 but in aluminum with a black cap?

I have a pin that broke off (shown in the photos). I measured a non-broken pin and the length of the shaft is 1 1/8". It looks like the pin fits inside some collar on the inside. The pin has a small neck down region near the center of the pin. The main diameter is about 0.14" and the necked down ... (cont.)

Some of the plungers have broken. Where can I find replacements. Thanks

Need 8 of these and 4 latches

Hello, I am looking for 100pcs of these plungers, I found some that look similar but don't know if they would work. Could you please help me find the correct plunger or one that would work? Thank you!

Can I use this type of pin as a replacement for the Hurd S703 pin? My screens are brown, so I don't want to use the S703 in white. Thank you

I need at least 30 of these---- they hold the screen in the window frame

I am trying to find replacement parts for a broken screen.

Hi Folks,I am looking for thes plastic tabs used to lock in the window screen to the frame. Do you carry? Thanks, Pete

Hi I'm looking for screen corners for widows screen. Its what I have I will tray to send pictures with measurements.

I have jeld wen windows and the exterior screens have small spring loaded pegs that is in the frame to hold the screen to the window. The pegs have a plastic head to grab on to. Several of the plastic heads are cracked from sun and heat exposure. Can I get replacement plastic heads? Other sugge ... (cont.)

Weathershield New Style Metal Grille Clip with tab for double hung tilt windows.Used with several brands - Weathershield and othersMaterial: Stamped SteelMeasurements:Height (from base to apex of the folded tab): 1/4 inchWidth: (projection of pointed tip): 3/8 inchCombination Vent Lock / Security Ni ... (cont.)

Looking for parts for screen. Spring loaded pins and the top spring

My pins are 1/8" diameter by 1" in total length (without the cap). What do you recommend?

My name is Mark and I am looking to replace the following missing piece of my window, model EAGLE, IGCC CBA, IGMAC CIG-3, 2-90. The last pictures are of the missing part and the first pictures are of the actually part on the other side of the window as well as the part from the screen that fits into ... (cont.)