Viewing all customer Discussions for:

70-030 Screen Corner Spring

Hello, I have a few windows whose screens are missing their springs. The springs all seem ver similar to your product 70-186, but they are 3 1/4 inches in length as opposed to 3 in listed for the product. The holes for the spring are also 3 1/4 in apart. Do you have a similar product that could be u ... (cont.)

Missing screen clips. Need help in finding them

How do I work this to remove the screen?

I am looking for parts for a Jeldwin window screen.1) the corners2) the pull tabs3) the springs that push on the frame4) the spline shows .13 in a micrometerThe frame has this number: D-X71645

Hello,I need replacement screen retainer clips for my Rollyson DH-c45 Series 2500 window screens. I do not wise to have mismatched clips on my windows. I would like, if possible to replaces the damaged clips on several of my windows. Please find attached several photos of the screen clips in quest ... (cont.)

I need your help. I've twice ordered these window screen corners, and have ordered wrong each time. I'm sending a couple pics of the broken ones I have, with what I just received below it in the pic. I need 8 of these in total. I appreciate your help in advance. My previous order 95-223 is too ... (cont.)

Please see the attached pictures. Do you have a pull tab with the stop on in at the corner? If you do and have these in a blue white, I am ready to purchase right now. I would be looking at purchasing 5,000 of each of the corners and the corner springs. No. (Suggested 95-186 and 95-218.) If ... (cont.)

Hi I need four screen leaf springs for my American craft windows I'll add the photos Thank you in this matter Glenn

Swisco, Here is couple pictures of the side of the screen that I need the replacement part for it. Let me know if that helps and if you need more info. Thank you so much, Marcelo

I have a lot of windows to rescreen and I'd like to try your foam spline and invisible screen. My current spline size is 0.125 and is the vinyl ribbed type. I saw a post on your site that suggested using foam spline of 0.140 diameter for this application. Is that correct? Also would you have a part ... (cont.)

Has anyone calculated the compression of a corner spring. I mean, how much will the corner spring compress before it goes to solid. I guess it might be more accurate to ask, how much should I allow for the spring when fabricating a new screen frame. For example; My measurement from extreme inside to ... (cont.)

Would you be able to describe how these plastic clips work on my screens for my sliding vinyl windows? I am also looking for replacements. Thank you.

How much of a gap will this fill with slight tension? &/or which spring product is the 'tallest' Thinking of using it on front of frame, instead of top, to be able to insert frame in a track/channel that is wider than frame. Thx!

Please let me know if you carry either one of these clips.

It's 1/6 inch wide.

My screens have the cheap screw in type plunger that doesn't hold at all. The hole in the screen frame just gets larger the more you try to screw them in. Is there any other type of plunger that would work. Thank you.

Need 70-030 and 70-193, but in some kind of salt-resistant metal. Do you have copper, stainless, or any other material?

I too have those horrible plastic butterfly clips on my window openings to hold the screens. Happily, I've just moved into this home and the screens are in bad shape so I will have to replace them as well, meaning it's easier to use corner springs in my case (plastic corners). The screens fit closer ... (cont.)

I'm sending three pictures of a tension spring I'm looking for. Yes, I did explore the 70-186, but... the main problem with this item is the tab is too long. My customer wants the tab to be about 1/8

I am holding a stainless steel tension spring 1/4" wide and and 2 3/8" long, in the shape of your 70-030 tension spring. I snagged the one I have, as something that a local window screen maker gave to me. The springs fit the thickness of the screen frames, since the screen frame thickness is 5/16 ... (cont.)