Viewing all customer Discussions for:

70-193 Slide-In Spring Clip

Hello, I have a few windows whose screens are missing their springs. The springs all seem ver similar to your product 70-186, but they are 3 1/4 inches in length as opposed to 3 in listed for the product. The holes for the spring are also 3 1/4 in apart. Do you have a similar product that could be u ... (cont.)

Hello,Do you offer metal bracing clips for Vinyl Window screens as shown in the photos? Regards,Tony

Missing screen clips. Need help in finding them

I need your help. I've twice ordered these window screen corners, and have ordered wrong each time. I'm sending a couple pics of the broken ones I have, with what I just received below it in the pic. I need 8 of these in total. I appreciate your help in advance. My previous order 95-223 is too ... (cont.)

Please see the attached pictures. Do you have a pull tab with the stop on in at the corner? If you do and have these in a blue white, I am ready to purchase right now. I would be looking at purchasing 5,000 of each of the corners and the corner springs. No. (Suggested 95-186 and 95-218.) If ... (cont.)

Our windows were built with plastic clips to attach to the window track, but with age a lot of them have broken. The corners of the screens appear to be sealed so I'm not sure a slide in clip will work. Any help would be appreciated, most of the screens will not hold in place anymore ... (cont.)

Has anyone calculated the compression of a corner spring. I mean, how much will the corner spring compress before it goes to solid. I guess it might be more accurate to ask, how much should I allow for the spring when fabricating a new screen frame. For example; My measurement from extreme inside to ... (cont.)

I have these types of springs on the screens for my peachtree double-hung and casement windows. I have lost several over the years. Would like to find about 6 of them. Tom

It's 1/6 inch wide.

Need 70-030 and 70-193, but in some kind of salt-resistant metal. Do you have copper, stainless, or any other material?

I too have those horrible plastic butterfly clips on my window openings to hold the screens. Happily, I've just moved into this home and the screens are in bad shape so I will have to replace them as well, meaning it's easier to use corner springs in my case (plastic corners). The screens fit closer ... (cont.)

The back door has two glass panels that can slide up and down. Their side clips have been lost. Only 1/2 of one clip remains. It is 1/8" wide and about 4 3/4" long. The holes they go in are 4 3/4" apart. Each window requires two of these clips/tension springs. I haven's been able to find the neede ... (cont.)

I'm sending three pictures of a tension spring I'm looking for. Yes, I did explore the 70-186, but... the main problem with this item is the tab is too long. My customer wants the tab to be about 1/8

I am designing a filter enclosure that will be using these leaf springs in a high humidity location and need to know what kind of coating is used on these, rather it is zinc phosphate + oil, electroplated zinc + chromate conversion coating, zinc phosphate + organic coating (usually cathodic electrod ... (cont.)

I am holding a stainless steel tension spring 1/4" wide and and 2 3/8" long, in the shape of your 70-030 tension spring. I snagged the one I have, as something that a local window screen maker gave to me. The springs fit the thickness of the screen frames, since the screen frame thickness is 5/16 ... (cont.)

4" long screen tension clips.

Thanks for posting! Have you seen our Replacement Tension Spring category on our site? Take a look through that to start and see if there is anything that matches your hardware. I would take special note of our 70-030 and 70-193.

We have cheapo aluminum screens, and the slot where a leaf spring would go is slightly less than 3'16 in. What springs can we use, and please indictate how they would be installed. Thank you. Jim