Viewing all customer Discussions for:

80-102 6' Sliding Door Track Cover, Small

looking for glass slider roller wheels and new aluminum base track (8') with roller wear strips

Hello, This sliding door gets lots of Oregon Coast ocean air. I would like to replace the rollers and add a track cover. These look like pretty standard vinyl doors. Is is possible to figure out the rollers I need based on the model numbers and brand info in the second photo? Or, will I just ne ... (cont.)

I am looking to replace both rollers and add a track cap as mine is very worn.

Dear Swisco: I am looking for a repacement of our back slider tread cover. It is about 0.25 in tall, 0.25 in wide, and 70 inch long.

Roller pack for aluminum single glass sliding door, might be from 1979's. Do you have st stl cap for the roller to ride up on ? Also the little plastic end caps that help push dirt away from rollers Thanks

Lookiing for 70" (willing to cut) sliding door track for Oldach patio door. Door is aproximately 30-years old but functions fine other than track worn out. This U-Channel track measures: 1" wide (OD) 1/2" tall 1/16" thick material. Thanks, Dave

Our door has no manufacturer info. It is a generic sliding glass vinyl patio door, 60" wide, with one door stationary and the other sliding, left hand slides when viewed from outside the home. We need help with a couple of parts. (1) At the top end face edge of the stationary door where it is besi ... (cont.)

Please identify a replacement for the roller in the pictures. I will also need a 1/4" track cover. I believe the p/n is 80-102. Let me know if you need any additional information.Thanks,Don

Can I get parts for a guardian sliding glass doors rollers and track cover

We need the replacement parts for the two rollers. L_O_R1001_TOOL 514_643452C We also need the track cover (rail topper).

We are looking to replace the bottom track of our patio door. Can we get the part from your company? Please advise asap. Thank you.

The metal track got bent on my ply gem sliding door.

Hello, It looks like we need a new rail for our patio door (cmhc-7615). Is it something your company can help with?

Hi I have a Wasco Patio sliding door and I need to replace the handle and also the metal piece that allows the door to slide. Thank you

Hello Swisco , I was also looking for some replacement parts for the track on the patio sliding glass door such as the metal glide and possibly the vinyl track below the metal glide that sits in the door frame on the bottom , I did look at it and it appears Ok under the worn out metal glide , but j ... (cont.)

I need 2 new rollers and new 6 foot track (80-102). Attached are pics of the rollers, if you could please help me identify what part number they are. Thanks

Hello, I own a home with a 70 x 79 inch double sliding door, model SGD-R20. First question--the lock that the handle latches onto has disappeared (it's a rental home, so not sure when it disappeared....). So I need what seems to be called a lock keeper. See picture--it is the kind that screws ... (cont.)

Vynil/plastic spine that the door slides on has broken away from the base track and door can no longer slide. There are no manufacturers markings anywhere to be found. The thermal pane door glass has the IGMAC stamp on it. So, perhaps the door was made in Canada. Is there a replacement for the trac ... (cont.)

I am seeking a steel "bubble" track cover for the track on a 94" sliding lanai door.

We need the rail cover for the Arcadia sliding glass door that the rollers ride on.