Viewing all customer Discussions for:

81-004 Patio Door Roller, 1-1/2" Steel Ball Bearing

I have several doors with bad rollers and I need to match them the best as possible. I recently purchased the 81-004 and 81023 rollers from you the 004 was the closest match but still required modification to install. I have attached the existing roller and dimensions. Can you match this better than ... (cont.)

1 1/2 inch diameter. writing on the roller is production enterprises Miami, Florida. thanks

HELP! I am trying to replace the roller's in a sliding glass door in my home, the house was built in 1984 in south Florida and it is a 8ft wide, 74" tall door with a metal frame. The pictures attached are the roller that I was able to pull from the bottom of the door. Here are the measurement ... (cont.)

I have a condo in St Croix and the screens to the porch are not sliding well. I have attached a pic of the screens and a few of the PeDelMar wheel assembly that I was able to take out and see. If the pics don't come through, let me know and I'll try another way.

Hi, I was wondering if you carry these roolers. They are for a "Howard" sliding glass door. Thank yiu for any help you can provide.

Searching for rollers for my sliding glass door which seems to have rollers of two types although the two types may be interchangeable. The manufacturer is PE DEL MAR. I have looked at their catalog and part number AD1 323-LS seems close, but I am not sure. Photos attached. Please advise. ... (cont.)

2 1/4" wide X 1 1/4" tall X 7/16" thick No part numbers. Two rollers per door. Ray Door manufactured by James Ray Company of Wichita, Kansas. Firm no longer in business. Thanks, Michael

2 1/2 inches long. 1 1/2 inch wheel. 3/8 inch thickness. The extra lateral groove is not original, it was caused by wear. A-S NYC 7873

Need a replacement for my sliding glass door. I can't find any markings on the door. PPG Herculite K is on the glass. I would like to find a complete assembly or something that will work. The wheel is 1 1/2" diameter and is 5/16" wide. The housing is only 1/2" wide. Not sure how long the axle ... (cont.)

I have ordered new rollers and a sliding glass door track cover from you which I should arrive at my home on 2/28/13. Several other sites recommend a small bead of adhesive on the old track when installing the new cover and one site suggests installing small screws at each end of the track cover. ... (cont.)

The part that fits my door is 81-004, is there a double roller that would work also?

I think this is the same as your #81-004 I am going to need 2 Thanks for your help Jon PRODUCTION ENTERPRISES INC. HIALEAH, FLA

I don't know the manufacturer of my patio doors but I need to replace the rollers. The part number on the rollers is 41781. The doors are about 23 years old. It appears to be 3/4 in thick, body 2 5/8 long x 1 3/8 tall with 1/1/2 inch concave roller. There are screw holes on the top and end for m ... (cont.)

I have a peach tree Citation II door which i need to replace the roller assemblies on the door and need correct model number to place the order

I need 2 of them length and width important

Product Code: 81-004 Air Control Roller single wheel assembly replacement. I have 3 sliding glass doors that are custom made 4'x8' and are very heavy. I would like to replace with a double wheel assembly. Can you recommend a replacement.

I need six replacement rollers and two handle sets for 1970 alumn. patio doors. Sliding Patio Glass Exterior Aluminum Door Heavy Duty - 1975 +/- Vintage - Purchased in Boston I can't find any manufacturer's numbers or logos. It seems to be the same aluminum door as used on 1970's Deck Houses. ... (cont.)

Think I have 81-004 but cannot decide how to remove the old one, if it is screwed in from the top (10/32) screw, is there an easy way to get the screw out? If my instincts are correct, the glass prevents access to that screw.

What is the distance to one end from the hole on the top of the 81-004 housing?

What is width of 81-004 roller? Are there any other similar assemblies with 3/8 to 7/16 wide X 11/2 dia roller?