Viewing all customer Discussions for:

81-023 Sliding Door Roller, 1-1/4"dia. Steel Concave BB

Hi. I'd like to replace these rollers. The door gets major exposure to the elements, so I'm open to suggestions, as there's a bit of rot where these rollers are found. Thanks, Mark

Krestmark sliding glass door rollers

Hi, looking for this roller assembly, pictures are live so if you take the measurements they will be of the exact size . I would kindly appreciate you take the measurements so it will be more precise . This roller assembly just slides into a slot under the door , no need to screw it anywhere . There ... (cont.)

Hello,Can you help me? I am looking for replacement rollers for my doors. If you can identify and provide me with the correct replacement. Looking at your site it looks like a 81-023 it has a 1 1/4 wheel. I would need 8 -10.Thank you Greg

Looking for replacement rollers for this 1950's era roller. Any assistance is appreciated. Thank you!

Approximately 1.5"x3"x.75" (HxWxD). Wheel is 1.25" diameter. Marking on top says "ASTR BEC OMCO" in a circle

Please help me find replacement parts. Thank you!AJ

3/4" width, 1 1/16" height, 1 1/4" wheel diameter. Wheel is metal

Please see attached top, back and side photos. Unit housing width = 3/4 in. Unit housing height = 1 11/16. Wheel diameter = 1 11/16. Wheel Material is nylon. Units are attached to glass door bottom aluminum rail with drift pins. Note that the end view shows the top phillips head bolt must be the adj ... (cont.)

Please see attached. I need two rollers, one for each end of the sliding glass door. Thanks. Marty

Dual screw with rectangular cartridge adjustable inch and a quarter roller

I see that the roller 81-013 is discontinued, what roller# is a replacement for it.

Requesting replacement for two sliding door rollers, see uploaded images. Marking: Production Enterprises, HIALEAH, FLA Carriage Housing Dimensions: 3"Long; 3/4"Wide, 1"High (butt end) Wheel Dimensions: 5/8"Dia. 3/8"Thick (Overall) Door Unit installed 1977, original to home in St. Louis, MO. ... (cont.)

Trying to find these two cartridge mortise type of door roller. The rollers are plastic and in tandem like an inline skate.

Hi, I have a roller I can't quite match. I find similar ones without the knobs I have on mine. I assuming it's because they're manufactured wider now. It's a 1-1/4" diameter steel roller for a glass patio sliding door. The height of the housing is 1-1/4". The width is 5/8". I have no name or part ... (cont.)

I have a 1956 aluminum sliding door, single pane. Manufacturer is Crestview Products Limited. California. I can only find a roller adjustment screw hole on one end of the sliding door. The inside end.Is it possible that there is only one adjustment point?Are you familiar with this manufacturer? I c ... (cont.)

Do you have replacement rollers for an old 1960's sliding glass door made by Patiorama? Pictures attached. If the whole roller assembly is unavailable, can you recommend just the roller wheels? Thank you The roller wheel measures 1 5/16". It's old and worn out. It appears the outside is nylon with ... (cont.)

Dimensions: length 3 3/4" includes adjustment screw Width 11/16 Height 1 3/4" fully retracted (lowest adjustment) Please advise me if you have a suitable replacement (heavy door) Thank you for your help!

Need replacement parts

I need these roller there for two different doors