Viewing all customer Discussions for:

81-023 Sliding Door Roller, 1-1/4"dia. Steel Concave BB

i have to preface this by saying it was really hard to get the wheel assembly out. it was filthy and the visibility was bad. the outer assembly had a screw holding it to the bottom frame so we kind of bent every thing up before realizing there was a screw. the outer assemblu got mangled. the wheel ... (cont.)

So far what i have found to be pretty close is Product code 81-004. The only difference is wheel diameter. i need 1 1/4"

Is there a replacement for this or something i can make work? length 3 1/4 width 3/4 height 1 3/8 Wheel 1'

looking for help with these

Hello, I am looking to order a replacement for this patio door roller. The diameter of the wheel looks to be 1-1/4". I'd appreciate any help you could give me. Thanks!

Wide 5/8 inch, high 7/8 inch single plastic roller

Can you match or substitute the rollers pictured?

These rollers are off a set of fur wood sliding door from the 70's. They are in perfect shape except for the rollers. No marking or part numbers. Roller is exactly 3 inches in length. Width of 0.5 inches and roller diameter of 1 1/8 inches. Rollers insert into an aluminum rail

We have unique rollers here for the screen door portion of what I believe are Kawneer doors. I could be wrong. To note, they screw in from the top as well. So I have to remove the rail of the door to get to that screw. Any help finding replacement parts would be greatly appreciated. ... (cont.)

Please advise what would be the replacement part for the screen door wheel? Thank you

Width 3/4 in Height 1 1/4 in Length 3 in Wheel Width 1/4 in Can't find a similair style or replacement style that is similar - any help would be appreciated! Pretty old I think. Sliding glass patio door in a house we manage - maintenance cannot find a replacement for it.

Hi, I removed these rollers from my daughter's very heavy glass patio door. I spent 2 days and many hours trying to find the entire bracket units. I even tried finding just the rollers themselves since I had the brackets intact. No success. I had to put them back on the door & reinstall door ... (cont.)

No markings. 1 1/4" wheel, 2 5/8" length, 11/16" width, 1 5/16" height (not including wheel).

Roller

Need to identify and purchase two single rollers for my sliding glass door. The dimensions and diameter of the wheel is 2 3/8' L x 1 3/16' high and 9/16" Wide as shown on uploaded picture with a 1 1/8" wheel diameter. PLease advise.

Several days ago we called about roller replacements. Here are the photos of the rollers.The first photo shows the lower frame which supports the glass and holds the rollers with a screw securing the roller assembly to the frame.The second photo shows the approximate dimensions of the roller assembl ... (cont.)

We measured and the measurements we got were Length - 3 1/4 Width - 5/8 Tall - 1 3/4

These rollers came off of sliding patio doors in a condo in North Myrtle Beach, doors in which lead to a balcony on a second floor that gets riddled with wind, salt water, sand, moisture, improper care, etc. A few of the other rollers crumbled as we removed them, as did the bottom of the sliding p ... (cont.)

Looking for 2 replacement wheels for a sliding glass door

Outer stamped metal is 1 3/4" tall, 1 15/16" long, notch at bottom is 1/16". Inner stamped metal is 1 11/16" tall, 2 1/16" long. Outer bracket is 3/4" wide before it slims down to squeeze inner bracket. Inner bracket is 1/2" wide. Wheel is 1 1/4" diameter.