Viewing all customer Discussions for:

81-023 Sliding Door Roller, 1-1/4"dia. Steel Concave BB

Written on Roller is ASTR BEO OOAO the 'O's could be zero's. On corner of glass is written PPG HEROU TEK. More info on glass but can not read. I need a total of 4 rollers

This is the roller off a 7 foot sliding patio door that is 50-70 years old.

2.75 x 11/16 wide x 1.375 H frame w/ 1.5" diameter wheel OA height 1.75 No adjustments. Screws in from bottom with two #8 screws, 2.25" on center.

Need 2 rollers. There are no markings or anything on the rollers but the glass has a Guardian stamp on it.

1 &1/8 inch wheel diameter, 1 & 1/4 inch wheel width, casing that holds wheel assembly is 1 & 3/16 high by 11/16 wide, by 2 & 3/8 long, with 1 adjusting screw at bottom to raise and lower wheel. Top of wheel casing has screw hole just to the right of centre on top to screw wheel assembly to bottom ... (cont.)

Can't find any numbers on the hardware. But the brand is "Ultra".

I'm searching for the attached single wheel roller assembly. The cast metal has no markings. The plastic wheel has letters only halfway visible Toronto Can Syracuse NY and Spelling questionable "KILLAN" OR "KULAN". Thanks for your help.

Most likely from 1968-69 when home was built along Texas gulf coast. Metal housing. Single roller. 2 5/8 length, 1 1/4 tall, 11/16 width 1 1/4 wheel diameter

Roller adjustment for bottom of door.

Patio door rollers for a 1991 case mirage park model, no numbers available

Outer case 2 7/16 x 1 3/16 x 1/2 inch Inner case 1 14/16 x 1 1/4 x 1/2 inch Roller diameter 1 1/4 inch

Existing rollers stamped PRODUCTION Enterprises Inc Hialeah FLA is single roller. Want to replace with tandem roller assembly if possible. When I look at your roller diagrams, I can't tell if the roller diameter quoted is a edge of roller or bottom of grove.

Greetings, I need to replace the rollers on my patio door. The dimensions are:2 1/2" x 5/16", the wheel is 15/16". Please help image.jpg Rob

I recently purchased 3 sets (6) wheels of item # 81-258 Adore Hi-Lite series 1200 Patio Door Roller Assembly However, they're the wrong size.Attached: are Pics of the correct wheel assembly in hopes you can find what I need.I will return 2 sets (4) wheels back in exchange for the correct wheels.Tha ... (cont.)

Hi, Would greatly appreciate help finding a replacement for this sliding glass door roller assembly. The only marking on the door is "Alenco, Bryan Texas." The house was built in 1986 so presumably the doors is from around the same time. The diameter of the wheel is 1 1/4 inch and the total length ... (cont.)

111/16th" long x 11/16th" wide cast metal broken end gone looking to replace please provide screws for installation I want to buy 81-023 rear sliding door roller you sent me price 9.85 If you have door hatch send me price and I can buy both pieces at same time to safe on shipping them separately ... (cont.)

Need new rollers for sliding glass door wheels are 1.5 inches, width 3/4", and length 2 1/2 inches.

Part number or where can I buy. Thanks

ball bearings crushed in this roller door track in good condition door is heavy hired someone who took out rollers was able to replace front roller from HD we'll see how long last MH home Palm Harbor built 1991 so assume sliding doors to sunroom installed at this time. I hope pictures are visible. I ... (cont.)

took out of very old aluminum frame door