Viewing all customer Discussions for:

81-095 Adjustable Tandem Roller, 1-1/2" Concave

Hello, firstly, i'm sorry for my english. I speak french but i try to explain my situation in english. I'm looking for change this piece of my door. When i look the inscriptions of my piece on internet, i fell here. Where can i find news pieces for my door? Can i buy them here? (i living in belgi ... (cont.)

I spoke to someone yesterday who recommended that I send an email to your HELP line to get some assistance in obtaining replacement hardware for several closet mirror glass sliding doors. Below are photographs of the 2 types of hardware that we need. We will need 12 of the 2 wheel hardware and 4 of ... (cont.)

This is a roller out of my Reliabilt sliding glass door. It has a V marking stamped on one side (see photos).

Need this part.

Dimensions: 3/4(w)x1"1/8(h)x1"1/8(d) Wheel: Metal(2 wheels) Letter "V" marking on the side

I have a patio door manufactured by interstate window and door in pitrston pa. The rollers have bad bearings. The roller on the right is the original roller. It has a single mounting hole that fastens through top of roller frame into patio door. Do you have anything like this

Door size - 36" X 72" 1 fixed & 1 sliding panel. Door model, Jeld-Wen Premium Atlantic 3800 vinyl patio sliding door. I need to replace the roller assy. Jeld-Wen said I need to remove the full light glass to access the bolts that hold the roller assembly in place. The bolts screw into the top of the ... (cont.)

I have a 1984 White vinyl slider that needs new rollers for doors and screen, foot lock and, one of the glass panels appears to be fogging occasionally as well. Please advise what parts you can supply and what make and model of door are. No ID marks around bracketed frame vinyl upper frame and alumi ... (cont.)

Trying to identify these Vinyl door rollers. Some generic door from HD. Are the rollers 1.25" on the concave inside? Mine are 1.50" on the outside. Thanks in advance for any help. -Eric

I have a sliding glass door in a home that was built in 2001 that has the Guardian glass stamp on the glass. I am hoping that you have the parts that are needed to get the door rolling again. Above I have sent pictures of the parts I need. I will need two bottom rollers on each side of the door, the ... (cont.)

I need help finding this part or one that can be used in its place please.

This wheel works but the adjustment screw and nut are missing. I can buy the whole thing or just the screw and nut.

Hi, I'm looking for the roller assembly, not sure which part numbers are useful. Thanks!

i have 2 rollers that need to be replaced. they are off my patio door, and have a tandem wheels on each one that measure 1.5 inches each.

Would you have the sliding door bottom wheels for a Silverline 5500 series 55 5/8 x 80 Product ID 58001MPANEL Sliding Door tandem roller assembly. There are two for each door

Hello All I removed my wheels from my patio door. As you can see they're rusted and can't move freely. I was wanting to know the make and model for a replacement set? I wasn't sure about going to HD and purchasing the over the counter brands? And there's a lot of different styles and variations. Ju ... (cont.)

I need replacement rollers and a lock for a glass screen door her 2 metal wheels and a metal housing there is and there is 2 screw holes on the outside opposite the wheels a screw hole in the middle on top and no brand name

Information on header of door frame: NAMI 302187,make date 4/27/2018,sales order 08133347,warranty 33138035.bottom of tag "G". Frame height1 1/8, width 3/4, over all length 3 3/4,steel rollers, color, brass, roller diam. 1 1/8,axle 1/4x1/1/2,stamp front of frame near adj. screw is "V". ... (cont.)

Patio door rollers - I need a pair! These are 1-1/8 inch high by 11/16 wide, with 1-1/8" tandem wheels

Need 2 replacement rollers please see photos