Viewing all customer Discussions for:

82-005 Surface Mount Sliding Door Handle Assembly, 4-15/16"

Thank you in advance for helping me find this part. Bill

Looking to replace both door locks.. do you carry these? Also not sure how the part with instructions is used but there's nothing to move in the direction to lock it, it's looks like it needs replacing as well.

I ordered 80-020 assembly for my mother's patio door, but now that it has arrived I can see that the locking mechanism on 80-005 is probably what I should have ordered. Can you help me confirm what is the correct replacement assembly? Also, can the handle from 80-020 be used with the 80-005 set? B ... (cont.)

Door is 3100 patio door pl# 356-001. I can upload more pictures if necessary.

I'm wondering if you can find a replacement for these patio door handles. Thank you.

Hello, Please take a look at the damaged glass door handle set. It's an old Arcadia door with an external latch. The hole spacing is 3 3/4". Looking over your choice of sets, the 82-261 seems to be the most compatible. Please advise with another choice if available.

What model of your door handle can replace this. the locking mechanism- goes into the metal rail Thanks richard

We are building this residential home but when we bought it over, these doors had already been installed w/o the handles/locks. Some of the doors have the locks/handles but not all like you'll see in the photos. We're not sure where these doors came from or the company on them either. I'm needing ... (cont.)

I wanted to convert the existing sliding door handle to include an external lock mechanism. I now think I can see the problem as lock shaft does not line up with the interior latch rod. Note in the "main" picture that there is a recess for an additional wheel / gear that would line up perfectly wi ... (cont.)

Sliding Likit Door (see patent number and pictures) about 27 years old would like replace rollers and maybe Door Handle (no outside key lock). Is Surface Mount Door Handle 82-0005 going work dimensions are 4 15/16 screw measurements long and 8.5 handle. Is 81-265 replacement Roller Assembly going t ... (cont.)

I have an older house with a patio door that has screws set about 4 15/16 apart and what appears to be a non-keyed Mortise lock with a 45 degree lever. Photos of the disassembled set attached. The lever has bent and the door will not latch. Is the 82-080 the appropriate replacement? ... (cont.)

need a replacement handle both sides for my sliding glass door. the house was built in 1956

Hello, we're looking for a new patio door handle with lock key set. Thank you!

I have an Arcadia sliding door lock /handle that has stuck in the locked position. It has a button type latch system, you push the top square button to lock and bottom button to unlock. Is there a replacement available?

I'm looking to put a lock on our downstairs/basement sliding glass door as we can turn it into an AirBnB. The key would be on the outside. The attached pdf has the dimensions as well as I could measure them. Do you have something that would work? Right now we are renting out the upstairs, but we w ... (cont.)

I can't find any replacement locking sets with the exterior type lock seen in the attached photos. The stock set is non-keyed and only has an interior switch for locking (would prefer a similar replacement). The mounting screws are approx 4 inches on center apart

I have a sliding glass door and the handle broke off looking to order a new one I've ordered a few from stores and online none that fit,bottom glass door reads: trempe tempered CAN/CGSB-12-1M BS 6206-1981-A 16CFR1201 C11 ANSI 2-97.1-2009 1/BUA SGCC-1605 4012

Please see the attached photos so you can see what I'm working with here. The hole to hole measurements are 3-1/2".

My name is Jennifer. If it would be best to call me so I can make it short that would be best? I purchased my house a year ago, my neighbor has the same slider and it is from Pelllgem great lakes, but I do not know the make or model and the homeowner did not transfer the warranty. There is no sticke ... (cont.)

Hello There. I am hopeful you can help me identify some parts to 2 sliding doors that I have. I have one pill handle that is broken, another that is in tact. The outside handles of the 2 doors are old and I hope to replace them. I am not certain if I need a new lock latch, but that may also be need ... (cont.)