Viewing all customer Discussions for:

82-005 Surface Mount Sliding Door Handle Assembly, 4-15/16"

Hi there here is what was on my handle CANADIAN PATENT 919213 PAT . NUM 3596954. Ws lookingthrew your door handle locks and looks like 82-005 is the same maybe .. thank you

I am working on a home built in 1954. I believe these are the original patio doors installed in the home. The owner wants to put a handle on the opposite door. I need to find one that looks like this. Thanks,

I need 6 replacement Daryl sliding glass door locks, non-keyed. The existing Daryl door lock overall dimensions are 7-3/8" long x 1-1/8" wide and a screw spacing of 6-13/16" center to center. There are 2 part numbers - on the exterior part is P/N 15047 and on the interior part is P/N 15049. Any help ... (cont.)

Hi, I need a sliding glass door handle in black. It is 7 1/4 " in overall length with the screws at 5" apart on center.

I want to replace the lock on my door so that it locks from the outside. I think I might have a frenchwood or Perma door. It is 1 inch thick. See pictures attached. Can I use the 82-317 and the 82-043 on this door? Thanks, Christine

I was doing a web search to try and find a replacement handle for my glass sliding door. Inside the handle was the following information. Sash Controls INC Detroit, 20, Mi. Also the number 060-1255. I am attaching some pictures of the system we have. Would Appreciate some help.

We recently purchased an older MCM house. The back wall is dual sliding glass doors that come together in the center. One side has a handle the other side was removed prior to us buying the house. One side is 3 1/2 inches, the other is 4 3/4. I would like to have a key lock on the outside also. ... (cont.)

I wish to replace the sliding door lock shown in the pictures above with one with a key on it. Can you tell me which lock i need to buy please?

I have an old (like maybe 1963) patio door with a Daryl brand handle. I tried ordering a replacement from another company and it was too short and too narrow; that company referred me to you. My handle has a 6 7/8" spread between the screws, is 7 3/8' long and 1 1/8" wide. Do you have anything that ... (cont.)

Also need rollers other misc parts.

I am trying to find a door handle that will attach to the inside of my florida room door. We have full size doors/windows that enclose the entire room. The handles are all missing. They have an inside glass door and an exterior screen door, we only need the handles for the inside glass door. They do ... (cont.)

I am trying to find out what handle and lock to buy to replace the one in the attached photos. The pattent number brought me to this website. The lock hardware is 7.5 inches and the screw holes are 5 inches apart. The wooden handle is 11 inches long. I have bought universal sets at home stores b ... (cont.)

Need to replace Sliding Patio Door Internal Lever Lock. Markings: Patent # 3.596.954 and Canadian Patent 919213 (1973). The lever/lock works, but the return spring is broken. Is your 82-225 part compatible? Thank you.. Anthony

I looked for the latch handle that was plastic that broke and no luck. Looking for a set. A rough quick measurement for center was 4" so guessing it could be 3-15/16"

I need a handle(s) and lockset for this pella 49" sliding door.

4 15/16 centered, ovearll length 7 3/8, width 1 ". Has Peach Tree doors printed on inside. Appears to match your 82-005 and 82-306. I am confused do I buy 2 pieces or piece? My home was built in 1973 and that year is on the handle interior. Handle s sticking. I have taken it apart and it seems a lit ... (cont.)

I need a replacement handle like the one in the picture that also has an outside handle.Installation holes are 5 3/4" apart Lewis Wilkes

I am trying to identify and replace the mortise lock that goes with this lockset. I can find no markings or engravings on the lockset. I'm willing to change out the complete lockset but the holes and recesses don't seem to conform to other lock sets. The mortise lock is not centered with the handle ... (cont.)

Hello, We would like to purchase the correct locking doir handle and replacement insulation for our 1977 sliding glass door. Thank you for any help. We're so happy we found your site. Lisa

Hello, I am trying to replace the lock assembly on a sliding glass door from a home built in 1972. I have attached some pictures of the lock and the door, some with a ruler to show dimensions, to help identify the assembly. Do you think you have a replacement that would work in this application? ... (cont.)