Viewing all customer Discussions for:

82-005 Surface Mount Sliding Door Handle Assembly, 4-15/16"

Need to replace a Likit sliding glass door handle. No part number, just patent# 106753. It is attached to a Likit door #LIK-012-1. The inside, outside, and latch are 3 separate pieces. I would like to replace all 3, but I must replace the faulty latch. My measurements are as precise as I could get w ... (cont.)

Hello - Sending three photos of part required for sliding glass door. The length of the wooden handle is 11". The holes that affix the wooden handle to the metal bracket are 6" from center. The holes that affix the handle to the holes in the door are 5" apart. Markings on the locking mec ... (cont.)

Hello, I've recently moved into a new home and we have a street facing patio door which will not lock securely. The handle is apparently an incorrect replacement and some of the parts are damaged. The rear plate which the handle bolts onto has recessed hand pulls and the dimensions are 8 7/16 ... (cont.)

looking for replacement door handles for my Sliding Glass Patio Door Handles that have failed. I believe after looking at your catalog on line the 82-005 model will work but I would like some conformation before placing an order? The 82-005 appears to be the same but the exterior plate cannot be ... (cont.)

The lock lever on the handle no longer stays in position, I would like to replace the handle if possible. The foot lock mechanism is broken. It screws into the bottom left of the door and the foot slide engages a bolt into the back of the door. What further information can I provide that would ... (cont.)

Canadian PN 919213. Dimensions

I have a broken door handle on the outside part of my sliding glass door. It is recessed into the molding and I would like to replace it with a similar one. Also I need to replace the lock. So I want to order the whole system. The aperture on the door is 8 inch long by 7/8 in wide. The current insid ... (cont.)

The broken latch on the patio door says Alenco, Bryan, TX. The sliding door is mounted on the outside. The latch includes a short security bar that inserts into the keeper above the latch hook. From the inside, the door latches to the left. The locking latch mechanism is broken. Does anyone kno ... (cont.)

I'm looking for a Peachtree citation sliding door handle. The holes are 4 7/8" Thanks - Madalyn

Hello. Please tell me the correct part number if you can. I have attached my dysfunctional patio door latch photo

Need a latch for a James Ray alum sliding door. The door name is Imperial RayDor. Latch manufacture is W&F MFG. Inc. Glendale, Cal. Is this part available?? If not is there a replacement that fits this door? Thanks for any help you can give.

pgt sgd-70 latch set I cannot locate a latch set that will replace my original. the problem is that the door thickness is 1 5/8 inches all the replacements seem to be for 1" or 1 1/4" door thickness you don't specify the door thickness on your web site. Where can I find one? this is a sliding patio ... (cont.)

Manufacture is Lachestar Latch: 1 1/2" long Hook depth is 15/32" Mounting holes are 1" apart Mortise: 5" Long Center is at 3/4" from edged Mounting holes (2) are 1/8 from edge Handle: Mounting screws are 1 3/4 apart

need replacement hardware similar to your model 82-002 lock unit for my sliding glass door. Unable to locate a lock for my particular application--the door is 1 1/4 inch thick...non-standard I guess. Door was installed in 1997. Cannot use locally-available hardware as they are made for a 1 inch d ... (cont.)

Hi there here is what was on my handle CANADIAN PATENT 919213 PAT . NUM 3596954. Ws lookingthrew your door handle locks and looks like 82-005 is the same maybe .. thank you

I am working on a home built in 1954. I believe these are the original patio doors installed in the home. The owner wants to put a handle on the opposite door. I need to find one that looks like this. Thanks,

I need 6 replacement Daryl sliding glass door locks, non-keyed. The existing Daryl door lock overall dimensions are 7-3/8" long x 1-1/8" wide and a screw spacing of 6-13/16" center to center. There are 2 part numbers - on the exterior part is P/N 15047 and on the interior part is P/N 15049. Any help ... (cont.)

Hi, I need a sliding glass door handle in black. It is 7 1/4 " in overall length with the screws at 5" apart on center.

I want to replace the lock on my door so that it locks from the outside. I think I might have a frenchwood or Perma door. It is 1 inch thick. See pictures attached. Can I use the 82-317 and the 82-043 on this door? Thanks, Christine

I was doing a web search to try and find a replacement handle for my glass sliding door. Inside the handle was the following information. Sash Controls INC Detroit, 20, Mi. Also the number 060-1255. I am attaching some pictures of the system we have. Would Appreciate some help.