Viewing all customer Discussions for:

82-008 Patio Sliding Door Handle, 6-5/8"

I am looking to replace an old slider lock but the door is just shy of 1 1/4" thick so what is available in HD & Lowes does not work with the key lock as parts do not meet inside in center. Does this lock work in a door that thick?

Good morning,I am looking for a way to add a secure external key lock to the older door in the attached photos. Do you have parts that will accomplish this, or a kit I can install?Modification of the door will not be a problem, if necessary. Unfortunately there is no manufacturer (or any other) in ... (cont.)

I am looking for sliding door lock for patio

I'm looking for a replacement to the attached. Overall dimensions are 7 1/4" x 1" and the holes for screws are 6 1/2" apart. I'd prefer to buy a unit that comes with a key and lock to be used from the outside

I purchased a new Patio Sliding door Handle 6-5/8" part number 82-008.The part did not come with a Security keeper and the one we ourchased from Home Depot was cheep and broke.The measurements of the original keeper is: 2 3/4" x 3/4" and appears tpo be heavy metal.What is the Swisco heavy duty Secur ... (cont.)

Hi, hoping to find the replacement for this part. Uploaded pics of both sides. Thanks

Hello I'm looking for a door pull. Originally installed in the eighties in Miami. Part say dns industries 1400 series. 11 outside pull on it. Any help would be greatly appreciated ?

The latch assembly is marked with "DARYL PATIO RAMA 300." One part is marked 19057 19106-BL, The other side is marked 19058 19103-BL. The little round black plastic spinner is badly warn.Can I get replacement parts?ThanksJay

I ordered the Swisco part 83-036 and it doesn't quite fit. The measurements of the door are 1" thick and the opening is 7" long by 3/4". Can you please advise a comparable dual sided handle with lock? Thank you

I would like to replace my patio door handle. The existing hole in the door is 7 1/2" by 3/4". The door thickness is 1 1/8". Which model will fit my door?

I am looking to replace the missing lock in patio door. I hope the photos attached will help to create an idea what this lock look like and be able to help us. Thank you.

The handle no longer works on the sliding patio door. All information has been attached.

I don't have any info on the door or the lock manufacturer. I would like to replace this part so the door can once again lock. Do you have anything that would fit this. It is 6 1/2" long 1" wide Any help is much appreciated

Lock does not work. Door manufacturer not known. Home is in a retirement community-Holiday City, Toms River, NJ circa mid-70s. Looking for either lock mechanism or handle/lock. 2 Pix -including one to indicate measurement. As best we can, 7-1/4 from top to bottom of metal;6-5/8, 6-6/8from screw to s ... (cont.)

See picture of slider door lock and sliding window lock - both likely from 1980

Only ident I can find on the lock is Delta Industrial Systems part number 45-8401

Does the 82-008 work on a 1.25" thick door. Original DNS 1400 12 inside has a track that holds the hook and it allows the hook to be moved inward or outward depending on the depth of the door to center it. Similar model lock set at Home Depot/Lowes like your 82-008 does not allow hook movement for ... (cont.)

My dns door is marked with 13/23 standard It has a standard key lock on the outside door a locking slide that moves up and down to lock from the inside. A 1989 model Do you have a replacement??? The key just spins in the lock

DNS Industries 1400 series patio door lock for a sliding glass door that's 1.25 thick.

Good Day, Is it possible to identify my locks from these pictures.