Viewing all customer Discussions for:

10-101 7/8" Round Shower Door Wheel

Looking for this exact door roller wheel

the plastic wheels at the ends of the rails are broken. Is there a way to replace just that paryt. if not, where to get the rail. Thanks p.s. pic is upside down, obviously alan

I will require about 10 of these screws which appear to be 3/8 of an inch long and 5/16 in thread diameter. The white nylon guide bushing appears to be 7/8 inch diameter or so and I will need four of those.

My half moon glass shower doors need bottom guides and top rollers, it looks like product code 10-060 will work for the bottom guides! I can t seem to find top roller wheels as replacements I'm sending a few pictures! Hopefully you can give me the correct parts! It looks like there's a small Allen k ... (cont.)

Need new ones for sure

Looking for 2 sets of these drawer glides

Hi there - I removed these parts from the screen door of a condo that was built in 1965. I don't know if the screen is original or a replacement but it looks like the tracks are probably original. I tried looking through your site but could not find anything that looked like either of these parts ... (cont.)

Hi there, I am trying to repair some of my screen doors (47 inch across). I am having two issues: (1) the plastic track on the bottom of the door that fits into the frame groove snapped. As a result the bottom of the door swings off (its not connected at the bottom). I am attaching some picture ... (cont.)

Broken roller (as pictured, the bracket is OK). I've found 3/4" but these are 1". Also as pictured, the area where the screw goes in is raised out 1/8" where the replacements I'm finding are flat.

Can you tell me if you have anything to match these? I bought a previous replacement and the thickness is a little less, causing the door to drag.

shower door has white vinyl frame - rollers have been replaced before - wheels have metal disc hub on them

I just need to know the exact part number to order new rollers

These mounts on top of the door. So you carry it know where I might find it

I have a couple kitchen drawers with this type of slide. There is only one roller set per drawer that attaches to the front of the cabinet. The rollers are giving out; they are 7/8" in diameter; 1" would probably work. Either need to try to replace completely (not sure how), or try to replace bad ... (cont.)

The drawer rails are marked Vogt Industries. The 7/8" nylon roller cracked, and set free all of its ball bearings. Of course these cabinets were new some time in the 70's, which means the style of hardware is probably out of production. Just thought I would give you all a crack at it. And I don't se ... (cont.)

This is a top roller for a full sliding shower door with a frame. We think the sliding shower door is a Delta purchased about 7 years ago from Home Depot. They do not carry the parts. The door has a frame. We have not been able to find anything similar. We did not find any markings on the piece. We ... (cont.)

Here is one of the two roller brackets that originally supported the pocket door I am repairing. I have it arranged on a strip of paper that represents the 1-3/8" thick door I need to rehang. I have it positioned so that the wheel lines up roughly with one of the two v-tracks that it has to sit in w ... (cont.)

Looking to replace worn rails or wheels on metal kitchen cabinets.

I need to replace the wheels on the top of my shower doors. There are 2 per door with 3 doors per shower, so need 6 wheels per shower. I have 2 showers so need 12 total wheels for replacement. I?d also like 12 wheels for back up, needing a total of 24 wheels. Hope that makes sense! Thank you! ... (cont.)

I recently ordered a set of 2 shower door wheel assemblies, but when I got the package, it was the wrong ones.