Viewing all customer Discussions for:

10-101 7/8" Round Shower Door Wheel

When I powder coated these drawers I misplaced one of the rollers. The 1 1/8'' will not work. They are rescued from a demo.

Looking for 4 of these...

The guy I bought the cabinet from told me they came out of a pharmacy. I purchased part 10-101 which is the right size 7/8" x 1/4" with the hole size of 3/8". I drilled out the bearing but the problem with the 10-101 is the center after I removed the bearings was thin and broke when I tried to put i ... (cont.)

Hi, I'm looking for rollers to replace some ball bearing rollers for my kitchen cabinet drawers. I've included pictures and dimensions that I was able to determine. I have no idea the brand name of the rollers. Please let me know if you need more information. Thanks Gary

Size appears to be 7/8 x 1/4 and appears to be pressed in. Need 4

The photo attached is a cracked bracket and roller for an old sttyle framed shower door . The bracket has since failed (broke along the cracked surface) so the door doesn't roll. Do you have (or know where I can get ) a replacement for this roller/bracket assembly? Thanks much.

Hi, I could also use some help on how to attach sliders on bottom of glass doors. I totally forgot because it's been a few years since i have had the doors off. I do have the rollers on the top of the doors, so i guess i'm set to go there. Just not sure how the bottom sliders go. If there are on lin ... (cont.)

Hi Maybe you can help me get this weel, I've tried local hardware and home Depot but they all have a thicker weel that the dor doesn't fit into the track. Thank you so much Shloimy

Shower door roller

Goes on top of mirrored closet door. May be the original equiptment for home built in 1960. Thanks for you help.

Hello, I'm searching for a round replacement wheel. This wheel is part of a round door corner shower. The wheel is about 7 millimeters thick, and about 26 or 27 millimeters in diameter. The metal middle has a threaded hole to allow a screw to attach and the bearings allow the wheel to spin with ... (cont.)

Looking for Rivet Axle type of roller wheels for flat file cabinet. 1" diameter, 1/4" thick, 1/2 deep. If no rivet type are available please include other options. Thank you Joel

i need to replace the shower door rollers, but I couldn't find a similar part, I saw rollers but I'm not sure how to get the wheels off?

The hinges/wheels on my old pocket doors broke. There are no part numbers on them or even the door handle in case it was a kit. The wheel is suppose to be attached as one piece. I put a screw in thinking it would work and it's not working even with a lock nut. Please help me find replacement hinges/ ... (cont.)

The track is fine, but I can't find the rollers that fit.

What diameter is the nylon ball bearing wheel? I'm looking to match an old chemistry table and the wheels are 7/8" diameter on a 20" long slider.

The width is 1.5 inches total 1.0 inch total metal part width of the metal strip 0.25 inch

Hello, I hope you can help. I have fixed drawer rollers (two on the cabinet and two on the rear of the drawer). I need to replace some of them. They appear to be nylon. The OD is 7/8" and the thickness is 1/4". They are riveted in place so I can probably make any ID you have available work. ... (cont.)

I have inherited a set of metal laboratory-grade cabinets, enough to equip my entire workshop and for a great price (free). The only thing wrong with this set is a bit of wear and tear, including worn out / broken nylon rollers on the drawer slides. the drawer slides are welded onto the meta ... (cont.)

Looking for Glass closet door rollers.