Viewing all customer Discussions for:

82-036 Surface Mount Handle Set, 6-9/16"

We need to replace inside and outside pulls with a detached locking mechanism on 3 patio doors (brand/maker unknown.) The screw hole placement is 6 3/4".Pictures are attached.Cynthia

Patio door handle.

Screw holes 61/2 inch apart. DNS IND stamped inside.

Does your company carry patio door handles with screw holes this far apart? It's an old sliding patio door. This door handle is actually on the opposite side and upside down for reasons not able to share online. Let me know if you still need a pic with handle removed. Thanks Linda ... (cont.)

Hello, I've asked before but this time I have a diagram and actual photos of the inside handle. Of course, I am looking for both inside and outside handle part. Thanks, Catrina

Can you let me know the part number and if you have the part to get it replaced?

Existing sliding door handle on a Canadian Door. My brother measured the screw holes to be 6 1/2" on center. I am wondering if 82-036 is a direct replacement? thanks for your help. Brian

Do you carry this little guy

The only marking on the handle is on the inside: CD 440K. It has the locking mechanism inside the handle with the silver clawed plate as you see im the pictures, and no traditional mortise (or anything) within the door itself. There is a receptacle attached to the wall that receives this locking pla ... (cont.)

The handle is broken on the door. I think this is the original door for the home, which would mean it was manufactured in 1987 or 1988. The sliding door measures 60x80.

HiI'm looking for a replacement part for my sliding door.Code on the part is CD 454. The small metal nodes broke off this part.Can this be pursued individually?I've included a photo of the part and the entire mechanism for identification purposes. Thank you!Paul

Will this work on right or left?

Hi I have a PPG Herculite K Sliding Patio Door. My lock is broken, and it doesn't work. I need to replace the broken lock but has been finding it difficult to get the right parts from Lowes, Menards and Home Depot. Here is the information located on the corner of the glass door: PPG Herculite K T ... (cont.)

Latch located on inside. Screw holes almost 7 inches apart

Help! My Great Uncle's sliding patio door handle broke and I am desperately looking for replacement handle that will work. Distance between screw holes is 6-9/16 in.

I need to replace two sets of sliding glass door handle and lock. The door lock no longer works. It's not latching. If there are any updated version of this type of lock and handle that would fit my door that would be great. Thanks!

Hi, we had to remove our sliding door handle to fit a couch through the door, but can't for the life of us get it back together with the locking mechanism working. Photos of how it looks right now, after quite a lot of fiddling. Exterior part says CD440K, metal disk with hole in the middle says CD45 ... (cont.)

Handle and lock is one piece. Screws are 6 5/8"

Can you identify this door handle from the attached pictures and quote me a replacement?

May I purchase two internal locking mechanisms, plus one thumb lock levers. The handles have CD 439 & CD 440 stamped on the inside. I could not locate these in your parts section. Thank you in advance for your assistance. Tony