Viewing all customer Discussions for:

82-229 Mortise Lock With Pocket Trimplate

These PGT sliding doors have one handle on the inside on operational door and two handles on the outside (one dummy and one on the operational door. Do you have any thing along the lines of the square one that is in the PGT image? Thanks for your help. Thomas

Need a 7 1/2 in patio door handle in white. Have 3 15/16 screw holes. Width if door is 1 11/16. Handle screws into face plate is 5 1/2 in. Do you have anything that would work? Thank you

I would like to have replacements for this. Can you help me?

I believe this is an Anderson Reachout # 82-242. I will need you to confirm that as well as include the Handel, Lock, and sex bolts coming through the frame used for attaching the locking mechanism in place. It is these sex bolts that broke and will need to be replaced. Let me know if you can help ... (cont.)

Can you please identify the lock that is needed for replacement based on the pictures attached thank

Lost your last response. Is the mechanism available by itself? Special order?

Locks seem have a little bit of play and do not latch and lock

Hello. I wanted to make sure the parts I am about to purchase are the correct parts for Sash Control 2260. Your advice is much appreciated. Thank you.

Looking for trim only (dura finish) brown

I need some replacements pls.

Can you please help me get part number for the lock case body on image3.

My handle needs to be replaced. Exterior handle part 1060-1943 and the interior part number is 1963. What would the replacement parts cost me?

We have two sliding doors, one with a keyed exterior entry (IMG_1494c) and the other with only the interior latch opener (IMG_1493c). What is the part(s) we need to replace the latching mechanism (the part that hooks onto the door jam)? Do we need a different one for the door that opens with a key ... (cont.)

I need to replace two #31761A "Truth" rollers, for an Anderson 8' x 8' white plastic sliding window, which looks to be of Canadian Manufacture.The opening for the roller is 4 1/2" long, 5/8" wide, and a depth of 1 1/2"Pictures are attachedI have two of your Model Roller 81-128 ...which, of course, w ... (cont.)

Hi, I wanted to know what lock I could get for this patio door, that has a key. The size of the outside handle is 6 1/8 inches and the inside handle is 7 1/2 inches. The hole inside for the lock is 4 1/2 inches

I need to replace the inner working of this handle so it latches properly. Can you tell me what parts I can purchase that will work?

So I order that piece, 82-244 and need to send it back because of the depth. It is not alike. Sending pictures. Any recommendations?

This door lock no longer works. Do you have a replacement that will work?

Slide door opener It?s malfunctioning and I need to replace itThe measurement shown on the measuring tape picture

Hello, I am hoping someone can help in identifying the right replacement lock mechanism. We moved into this home some time ago and the lock broke, as you can tell from the damage plastic bit. I think it?s a 45 degree, but it?s hard to tell from the damage. I looked into the patent number and it le ... (cont.)