Viewing all customer Discussions for:

84-018 Screen Door Roller, Peachtree

Do you know what the replacement rollers for this screen door. The roller is off of a very old Peachtree sliding door.

Screen Door Rollers 1" diameter x 1/4" wide. Can't figure out how to remove it. I've tried backing adjusting screw out, screwing adjusting screw in and unit won't budge. It doesn't appear to be the type that clips on to pins in the aperture. No apparent markings

Cannot find any identification numbers on door or rollers. Roller wheels are broken

Hi I have looked through all of your screen door rollers and can't seem to find a match. I am looking for a replacement for a Citation door with a 1 3/16" nylon wheel, with 3/16 or maybe 1/4" width to the wheel, but the mounting hub can be no more than 5/16" or it won't fit in the bracket that only ... (cont.)

The current doors were built in 1975. I am looking for 16 METAL rollers with the following dimensions: Largest Diameter 1-1/4" Groove Diameter 7/8" Width 3/8" Hole 19/64" (I can take a 1/4" hole and drill it out bigger to use the current center shaft, that is no issue) Do you have a match fo ... (cont.)

I'm searching for the correct rollers for a mid 1980's Peachtree Door screen door. The owner has purchased new replacement roller from HD and Lowes, but neither allow door to roll freely. He doesn't have the original rollers, so don't know what they were. I believe the door is for either a 5 or 6' d ... (cont.)

I have a sliding patio door with double wheel rollers. Do you have the weather seal that the rollers assembly fits into and then screw into the channel on the bottom of the door? I did not see any on your website.

I installed 2 of your patio doors 30 yeas ago and they are alive and pretty well.I replaced some wheels on one of the glass doors. screens have been fussy occasionally after lots of kids banged on them. Some folks would replace them but I am handy and prefer to keep them rolling I need a total o ... (cont.)

Hi, I have an old Peachtree Citadel screen door, date unknown. I need two parts. 1) Wool pile: I measure it at 5/32 or 3/16 wide on the flat bottom and 9/32 or 1/4 tall to the wool pieces. Suggestions? 2) Roller: The one I need for this screen door seems to be 84-018. I'm not sure how to re ... (cont.)

We have a peachtree french door with sliding screen door. The rollers on the bottom of the screen door need replacing. It looks like there is rivot that holds the spring in place and adjustment screw on side the of the door, (aluminum) I am not sure which items to order. Can I get some assistance pl ... (cont.)

I have some mid 1980 peach tree patio screen doors that need the rollers replaced. I've removed all the screws I can find and still cannot get them out. What is the secret or what am I doing wrong? Mike K

Hi. This wheel is for a patio screen door for a house built in the 1950s. There are two stationary wheels on the door and two like this, which retract into the channel to allow you to put the door on the track. The wheel is plastic and the housing is metal. I have not been able to find a similar ... (cont.)

Hello This is the roller hardware on the bottom of a cabinet we bought at Crate and Barrel. The nylon wheels are wearing out badly and never were really strong enough in my opinion to carry the load of the door for regular usage. I would prefer to replace the wheels, they are easy to remove from ... (cont.)

I am looking for rollers and track replacements for model # 9041031/06 installation date was 7/20/04

I have an old screen sliding door that has a broken roller. Can you help me find a replacement roller. I can't afford to buy a new door so hope to find a new roller so that it can be used. It is hard plastic, 1.5" diameter, 1/4" wide. I have searched local hardware stores without success. Thanks for ... (cont.)

Will the 84-075 roller work on a PeachTree patio screen door that was made in 1989? Thanks, Jim

Do you carry a wheel for the Citation Patio Door? Will the 84-018 work?