Viewing all customer Discussions for:

90-005 Window Sash Lock, 2-1/4"

These photos are of the hinges and latches off of a glass block window vent. I can't find them locally and hopefully you have them. The photos show good ones on another window in my house. I will need 4 hinges and three latches.

Also need clips for it as well as locking latch. Vanilla windows

Can you tell me wether y'all carry this latch. Is so I need to order 9 lefts and 9 rights

I need replacement parts as shown in the pictures for 12 windows.

I think this is called a sliding window latch. Do you sell them?

This is a 3 inch lock. Do you have this product or know where I can find it? I don't think the 2.25 inch will work. Thank you for your help

Hi ,Need your help. Please review the attached pics of the window lock latch and a window lock keeper with dimensions and please recommend a the correct the part number with a Swisco link.Please let me know if you have any questions.Thank you Alok

The tab broke off, what is not worthy is that it is not a tapered tab. It is the same thinckness. And does not snug up the window.

Hello, would you have replacement for this style and size. thank you

Looking for a replacement part of this lock in the photo.

Hi I need to find a replacement part for the window sash lock. Width between screws are 2-1/4" standard. However, I will need something close to 1mm in order for the extruding lock portion to engage with the window. Most common one I found are just half the way reaching the window frame. I found the ... (cont.)

The length of the spiral portion of the balance is 30". The spring appears to be the same. I don't know how we were able to get this out of the sash. Others were not readily popping out. It seems the failure is caused when the window is opened too quickly, forcing the spring to deviate and break fre ... (cont.)

The metal one is the Krestmark original. I bought the white one from your store and it doesnt work. Do you have one like the metal one?

Will these locks work on a Gwwd style window?

Need to get replacement window locks. The handle broke in two (2) windows and one does not work too well (does not lock fully). Name says Sunair Aluminum Corporation. Size: Length: 2 plus 7/8 inches approx Width: 3/4ths of an inch Color: white (see pictures

Hello I need bottom bearings and bearing holders as well as side muntins for Artium Windows. The house is 14 years old.

I'm not sure what the part I need is called. Please see the picture. The latches 2 3/4 x 3/4 of an inch. I need 10.

I am the Jr Warden (responsible for the care f the buildings and grounds) at the Episcopal Church of the Good Shepherd in Silver City NM. We have some vertical sliding windows which need new sash locks. They are similar to your 90-005 locks with a 2¼" spacing between the mounting screw holes, but w ... (cont.)

Hi, I need 40 sets of the items I attached.

1. Are your series 29" 380 channel balancers a direct replacement for my old Viking windows? My units have the # 2830 S stamped on them. Your top 19-005 attachment is winged like mine, but your bottom 15-005 shoe is winged and mine is not. 2. My top sash guides, (your item 18-032), measure 1 & 3 ... (cont.)