Viewing all customer Discussions for:

90-005 Window Sash Lock, 2-1/4"

Says Capco on the top. Two screws.

Helo looking to see if you carry this or if you have anything similar to it

The 1st picture is what we currently have and they are plastic. What we would like is the gray one and that is made out of metal. We would like the color to be WHITE

Looking for a similar lock with a 1/2" tongue. 2 1/4" screw holes are good.

customer is needing this latch, can you help?

Need new window latch

Hello, Can you please confirm (looking at the attached picture) that the "projection" on the 90-005 latch (aka height of the tongue) it is 3/8" and not 1/2". There are some models that the projection is 1/2" which might be to long for the Milestone series 1000 windows that I have. The other dimensi ... (cont.)

similar to 90-005 looking for a sash lock with 2 1/4 installation holes but with a 5/8 locking tab

Do you have this PGT window latch?

Hi! I'm not the original poster but I'm also looking for a replacement of this part. I've attached a photo, the tongue is roughly 3/8s of an inch high and 3/4 of an inch wide. The screws you can see are 2 & 1/4 inches apart, the broken latch still has screws that are tricky to access/measure, but se ... (cont.)

I need two of the 27-4 BA CMC 11 I need four of the 27-3 GA2 CMC 9 I also need 4 of the atrium window locks as shown in the photo. What's the correct part to order?

Looking for this window lock see photo

Looking for a sliding door safety lock like the photo attached. Thank you.

Looking for Sasha lock f2590

Hello,Trying to find a replacement for a window lock on a small window that was installed in 1988. The mounting screws are 2 1/4" inches apart. The latch extends about 1/2" to the right of the body. It is black. Thank you. Jeff

Dear Sirs, Would you have two replacement locks for the Champion windows (picture attached) Thank you!

I have no idea how old our Viking windows are(they were here when we bought the house) however we are having problems opening and closing. After removing the window we noticed some of the metal rollers are missing inside and some windows don't have them at all? Some are on top and bottom some are on ... (cont.)

The lock/unlock lever broke in our bathroom window. Pics explain it best. I'm looking to replace the mechanism. The locking mechanism is about 3" x 0.75".

I need a window lock similar to the 90-005 but with a 5/8" throw. Does anything like this exist? All dimensions for the 90-005 work for me with the exception of the throw. Needs to be 5/8". Thanks

Hi, I have 4 older windows that need the locking mechanisms replaced. I'm not sure of the window manufacturer--they are very old. But the lock has a "GA" stamped on it. I'll enclose a pic. Can these still be purchased or am I out of luck? Mel